Skip to content
NordhansePort logistics · Hamburg depotExample company

Nordhanse UK Limited · Felixstowe, since 1921, 12,000 people, 15 sites in 15 countries

Getting started with AI · Logistics & Ports

How a port logistics company gets started with AI

Nordhanse doesn’t exist. Everything else on this page will feel familiar.

demi turns your systems into one record, carries over your rights and lets AI agents prepare the routine work. First the data, then the rights, then the AI. A person always approves.

+1,104 h per yearEstimate, not a promise≈ €71,760 per year, calculated cautiously, from five use cases

CSC Safety Approval

Approval
D-2021/0117
Date manufactured
03/2021
Identification no.
NHNU 304712 3
Max. gross mass
32 500 KG
Stacking 1.8 g
192 000 KG
Racking test
150 000 N
ACEP
D/ACEP/0117
NHNU 304712 345G1

Height mark 9'6" · 2.9 m

Max. Gross
32 500 KG
71 650 LB
Tare
3 750 KG
8 270 LB
Payload
28 750 KG
63 380 LB
Cube
76.3 CU.M
2 695 CU.FT

Examplemade up

The doors of NHNU 304712 3, shipment SE-26-04712 for customer #1702: number, type and weights on the right-hand door, the CSC plate on the left. Every value leads to its source.

The problem

Thursday, 7:20 am: 28 hours left until cut-off

Cut-off for the Far East service is tomorrow at noon. 38 export containers from Nordhanse are due on this vessel, and by then each one needs an export declaration with an MRN.

7 line items have no commodity code. On 3 shipments, the invoice and the packing list give different weights. 2 shipments lack the proof of origin the consignee needs for the preferential duty rate. What belongs together sits in three places:

In the TMSOrders, routes and the weight from the weighbridge at packing hall 3.

In the customs softwareEvery past declaration, with the commodity codes that already worked for each customer.

In the mailboxPacking lists, invoices, supplier’s declarations and origin declarations from the exporters, as PDFs.

Normally, the customs department spends all of Thursday searching. A container without an MRN is left on the quay and sails a week later. Without an origin declaration, the consignee pays the full duty for now.

Cut-off list, Far East serviceVoyage 2647E · Cut-off

28:40hours to cut-off
As of
Open items, as of 7:20
ShipmentCustomerWhat’s missing
SE-26-04712#1702Commodity codeItem 4, replacement spur gearbox, in NHNU 304712 3
SE-26-04698#1817Commodity codeItems 2 and 3, pump parts
SE-26-04725#1934WeightInvoice 18,420 kg gross, packing list 19,060 kg gross
SE-26-04731#1876OriginOrigin declaration missing, consignee in South Korea
6 more4 items without a commodity code, 2 weights, 1 origin

Here, each shipment fills one container. Without an MRN, it doesn’t go on board.

What happens here every month

  1. 300freight requests
  2. 1,000transport orders by email
  3. 200delays
  4. 500freight invoices
  5. 150new customs items

Together that is 4,100 hours a year, about 2.3 full-time roles. On top of that, there are around 7,500 container trips by road every month.

What hurts there

  1. 01
    Tenders from shippers

    Hundreds of lanes, 20 and 40 ft, reefer, dangerous goods, waiting times: every line is priced by hand with rates and surcharges and checked against capacity.

  2. 02
    Dangerous goods and customs

    ADR, IMDG Code, commodity codes, proofs of origin: the answer to a customer’s question is buried in regulations and old files.

  3. 03
    Spare parts for reach stackers and chassis

    Build years, retrofits, spreader types, axles: often only the workshop foreman knows which part fits which machine.

What demi does · An example

Every container on the list gets its MRN, none is left on the quay

  1. The list

    38 containers, 10 open questions

    demi puts the cut-off list next to the orders, packing lists, invoices and the declarations of recent years. 28 shipments are complete, 10 have an open question.

    Cut-off listTMS
  2. Commodity codes

    Seven suggestions, each with its source

    For item 4 of SE-26-04712, a replacement spur gearbox, demi suggests the commodity code under which customer #1702 declared the same gearbox in May. Every suggestion shows the declaration it comes from.

    Customs softwareF-26-119
  3. Weights

    Three shipments, two numbers

    On SE-26-04725, the invoice says 18,420 kg gross and the packing list 19,060 kg gross. The weighbridge at packing hall 3 matches the packing list. demi drafts the query to the customer, with both documents.

    WeighbridgePacking list
  4. Origin

    Two emails to exporters

    SE-26-04731 lacks the origin declaration on the invoice that the consignee in South Korea needs for the preferential duty rate. Only the exporter can issue it. demi drafts the email to them.

    MailboxDraft
  5. The approval

    The customs department says yes

    A customs declarant checks every suggestion and approves. Then the export declarations go out via ATLAS, the German customs system, and the MRNs come back.

    Human approvesATLAS
  6. Friday

    38 of 38 before cut-off

    At 9:40 am on Friday, the last container has its MRN. Approvals and every access are in the log.

    Log

The customs department already knows most items from earlier declarations. Each month, 150 new ones come in at 20 minutes each, and the calculation below counts only part of that.

Office <=> Terminal

Where demi works at Nordhanse: eight of 14 stations

demi can work at all 14 stations. Pick a use case and see which ones it touches.

Office

  1. O2Freight request & rate1
  2. O3Order & booking2
  3. O5Dispatch & routes2
  4. O6Customs & export5
  5. O7Subcontractors & invoices4
  6. O8Customer service & status3
One record. Every fact runs both ways.

Terminal

  1. S4Seal, weighbridge & VGM5
  2. S6Terminal & quay3
  • demi works here
  • Next at Nordhanse
  • demi can work here too
  • Line: box NHNU 304712 3, from the order via dispatch, weighbridge and customs to the quay

The payoff

Example calculation: five use cases free up 1,104 hours a year

≈ €71,760 per yearEstimate, not a promise
StartUse caseVolume per monthShareToday per yearFreed upValue per year
1Freight quotes straight from the request300 × 15 min40%900 h216 h€14,040
2Capture transport orders from e-mail1,000 × 6 min50%1,200 h360 h€23,400
3Report delays before the customer asks200 × 15 min40%600 h144 h€9,360
4Check freight invoices automatically500 × 8 min50%800 h240 h€15,600
5Check customs codes and preferential origin150 × 20 min40%600 h144 h€9,360
Total4,100 h1,104 h€71,760

Of 4,100 hours, we count 1,104: volume times time times twelve months, then only the cautious share of that, times 0.6 for partly digital processes. That is about 0.6 full-time roles. Calculated at €65 per hour: €49.50 labour cost in manufacturing according to Destatis, plus workplace, IT and overheads. No row shows what a box is worth when it makes its ship instead of sailing a week later. Use case 5: demi suggests commodity codes and checks proofs of origin against the invoice and the packing list; you review and approve. A number doesn’t fit your company? You can change every one of them in the configurator.

NordhansePort logistics · Hamburg depotExample company

On time for cut-off. Since 1921.

From Hamburg’s free port to a port group

Nordhanse is a listed port logistics group from Hamburg: 12,000 people at 15 sites in 15 countries. This page is set at the Nordhanse container depot in Hamburg, with 360 people. It hauls containers between Hamburg’s terminals and the hinterland, stuffs and strips them in three packing halls, runs the empty container depot and handles customs declarations as a customs representative. The depot has no ship and no quay of its own: the business is the box.

From the free port to the box

  1. Hamburg merchants found Nordhanse as a warehouse-keeping business in the free port: sampling, sorting and storing sacks of coffee and bales of cotton.

  2. Three years after the first full container ship called at Hamburg, Nordhanse’s first container chassis of its own takes to the road. The packing station for machinery exporters follows in 1978, the empty container depot in 1986.

  3. Nordhanse goes public and builds terminals and depots in Europe, North America, South America, Asia, the Middle East and Africa.

  4. On 1 January, the free port comes to an end. The customs warehouse in Hamburg is ready that very day; its own customs department has been at work since 1992.

  5. 12,000 people at 15 sites in 15 countries. At the Hamburg container depot: 360 people, 70 trucks, 140 chassis, three packing halls.

Profile

Founded
1921 in Hamburg’s free port. Today a listed stock corporation headquartered in Hamburg: 12,000 people, 15 sites in 15 countries
People
360 at the Hamburg container depot, in eight departments, including 88 drivers and 96 in the packing halls. All departments in the org chart
Site
Hamburg container depot: three packing halls with a customs warehouse and a dangerous goods warehouse (38,000 m²), empty container depot (12 ha, around 6,000 TEU), own workshop
Customers
Exporters from machinery, chemicals and food 55%, importers from retail and the coffee and fruit trade 25%, shipping lines and forwarders without their own trucks 20%
Per year
Around 90,000 container trips, 14,000 containers stuffed or stripped, 38,000 customs declarations
Revenue
depot around €58 million, group around €1.9 billion
Works to
ISO 9001, ISO 14001, SQAS, ADSp 2017; Authorised Economic Operator (AEO-F)
Systems
TMS, depot system, WMS, customs software, port portal and EDI, telematics, ERP, mailboxes
On site
4 empty container handlers and 9 reach stackers, one of them RS-0720–40 ft45/31/15 tH 15 mStage V

Locations

  • FelixstoweUnited KingdomNordhanse UK LimitedTerminal
  • HamburgGermanyNordhanse AGGroup headquarters
  • RotterdamNetherlandsNordhanse Nederland B.V.Terminal
  • Le HavreFranceNordhanse France SASTerminal
  • ValenciaSpainNordhanse España S.L.U.Terminal
  • GenoaItalyNordhanse Italia S.p.A.Terminal
  • GdańskPolandNordhanse Polska Sp. z o.o.Terminal
  • SavannahUnited StatesNordhanse North America, Inc.Terminal
  • SantosBrazilNordhanse do Brasil S.A.Terminal
  • ShanghaiChinaNordhanse (Shanghai) Co., Ltd.Regional headquarters
  • Hong KongHong KongNordhanse (Hong Kong) LimitedChartering
  • DubaiUnited Arab EmiratesNordhanse Middle East L.L.C.Jebel Ali terminal
  • TangierMoroccoNordhanse Maroc SATerminal
  • DurbanSouth AfricaNordhanse South Africa (Pty) LtdTerminal
  • MombasaKenyaNordhanse Kenya LimitedTerminal

Four services

  • CVContainer haulage
  • PBPacking & CFS
  • DLDepot & warehousing
  • ZSCustoms & sea freight

The start

How Nordhanse starts: freight quotes first, then dispatch and customs

Which systems and use cases join in the first 90 days
The first 90 daysDay 1Week 1Weeks 2 to 4Months 2 and 3
Systems
Mailboxes and TMSRequests and rates, read-only
Port portal and EDIRead-only
Telematics, depot systemRead-only, via a small connector in their own network
Customs software, ERP, WMSRead-only
Use cases
1 Freight quotesFrom day 1. Part of daily work from day 30
2 Transport ordersWith approval
3 DelaysWith approval
4 Freight invoicesWith approval
5 CustomsWith approval
Writing back
Into the TMS and the customs softwareAfter approval

Why freight quotes come first

300 requests come in every month, and each one wants a fast answer. For that, demi only reads: email, rate, fuel surcharge, other surcharges. Nothing gets written; sales sends the quote. Orders, invoice checks and customs then build on what demi learns here about lanes, customers and surcharges.

What Nordhanse does itself

  • ITTwo days for the connections
  • SalesHalf a day to name the rates and surcharges that apply
  • Customs departmentTwo weeks of reviewing drafts, alongside normal work

1Data

Eight systems become one record

1,267entries
1,408links
8systems

An excerpt from Nordhanse’s record.

AConnected

  • TMS
    Orders, routes, customer rates, billingThe surcharges sit in 40 Excel sheets on the side
  • Depot system
    Gate-in and gate-out, yard positions, damage reports, repairsDamage is stored as a photo, not as a code
  • WMS
    Warehouse, customs warehouse, dangerous goods warehouseCustoms stock and warehouse stock are counted differently
  • Customs software
    Export, import and transit via ATLAS, with MRNThe commodity codes per customer only exist in old declarations
  • Port portal and EDI
    Releases, slots, dangerous goods notifications, messages from shipping linesA release arrives as a reference, not as an order
  • Telematics
    Positions, driving hours, waiting times of the trucksThe waiting time is recorded here, not on the invoice
  • ERP
    Invoices, payables, costs, accountingSubcontractors invoice by PDF
  • Mailboxes
    Orders, packing lists, invoices, origin declarationsEverything that no system holds is here

Nothing gets replaced. Running a different ERP? demi connects to everything, from SAP and Oracle to the specialist software from the next town. At first, demi only reads. A person connects a system after seeing who will read what.

BHeld together

The same door. Eight systems. Now one entry.
Container
NHNU 304712 3Depot system, gate-out photo of 11 Nov 2026
45G1, 40 ft High CubeDepot system, container master data
Tare 3,750 kg, max. 32,500 kgContainer master data, photo of the door markings
CSC plate, ACEPDepot system, check at gate-in
Cargo
Shipment SE-26-04712TMS, order from customer #1702
UN 1263 paint, class 3, PG IIIPacking certificate, safety data sheet, dangerous goods notification in the port portal
VGM 24,310 kg, method 1Weighbridge, packing hall 3, 12 Nov 2026, 8:22
Seal NH 2604718Seal list, packing hall 3
Voyage
Slot Fri 6:00 to 7:00Port portal
Cut-off Fri 12:00, voyage 2647EPort portal, booking B-26-3381
Export declaration with MRNCustoms software, after approval
Packing list: cargo20,380 kgMailbox, PL-26-04712
Weighbridge: VGM minus tare24,310 − 3,750 = 20,560 kg20,380 kg packing list plus 180 kg dunnage and strapsPacking hall 3 matches

CLinked

Customer #1702 ships gearboxes and spare parts to South Korea with SE-26-04712, in box NHNU 304712 3, sealed with NH 2604718.

Who?

Customers, contacts, teams

  • Customer #1702Gearbox maker and exporter, organisation with the relation “customer since 2011”
  • K-1702-3Customer’s head of shipping, person
  • OE-ZOLLCustoms department at Nordhanse

TMSexported by customer #1702

What kind?

Container types and goods

  • 45G140 ft High Cube
  • 8483 40Subheading for gearboxes, item 4 is a spur gearbox
  • UN 1263Paint, class 3, PG III

Depot system, customs softwareis a 45G1

Where?

Halls, yard positions, terminal

  • Packing hall 3stuffed on 12 Nov 2026
  • D2-14-03Yard position in the depot until gate-out
  • TerminalQuay for voyage 2647E

Depot system, port portalstuffed in packing hall 3

What’s going on?

Orders and routes

  • TA-26-11873Transport order, packing hall 3 to the terminal
  • Truck 07Friday 5:50, chassis C-112
  • B-26-3381Booking with the shipping line

TMS, telematicsmoves under TA-26-11873

Which one exactly?

NHNU 304712 345G1 · Shipment SE-26-04712

The container with its shipment

  • Owned by Nordhanse and on the road this week for customer #1702. In the port, it is the first thing everyone asks about.

Depot system, TMSin the fleet since 03/2021

What applies?

Contracts and powers of attorney

  • RV-1702Framework contract under ADSp 2017
  • ZV-1702Customs power of attorney, indirect representation
  • T-1702-26Rate with fuel surcharge

ERP, mailboxesapplies to customer #1702

What’s in writing?

Invoice, packing list, emails

  • HR-1702-26-388Commercial invoice
  • PL-26-04712Packing list, 20,380 kg
  • Mail #5217Query about the commodity code

Mailboxesdescribes this shipment

What should it be?

Deadlines and obligations

  • Cut-offFriday 12:00, voyage 2647E
  • VGMreported before cut-off, under SOLAS
  • PreferenceOrigin declaration for the consignee

Port portalmust be in place by 12:00

What do we make of it?

Findings

  • F-26-119Item 4: commodity code suggested from the May declaration

demifinding on this shipment

At the pump maker, the pump with its serial number sits in the middle; at the machine builder, the line at the customer’s site; at the space supplier, the flight unit in orbit. At Nordhanse, it is the container with its shipment. The grid stays, the middle changes.

DWhat it can do

  • Recognise

    NHNU 304712 3, “NHNU3047123” from the gate photo and “the box for #1702” from the email are one container.

  • Unify

    “40HC”, “40HQ” and 45G1 become one container type: 40 ft High Cube.

  • Trace

    Every value shows its source, exact location and version. Unclear rows are kept too.

  • Look back

    Packing list next to invoice, May’s declaration next to today’s: every version stays readable.

  • Write back

    After approval, the TMS takes over the order and the customs software the draft declaration.

2Rights

The org chart becomes the permission system

Sales sees the customer rates; dispatch and accounting see the subcontractors’ prices. What an exporter sends for customs, only the customs department sees.

Hamburg container depot: 360 people, eight departments

Site management, staff functions and QHSE 8Site management 2 · QHSE and dangerous goods safety adviser 3 · Assistants 3

Orders, road, customs and administration

  • Sales and customer service 16
    • Sales and pricing 7
    • Customer service 9
  • Dispatch and container haulage 106
    • Dispatch 18
    • Drivers 88
  • Customs and sea freight 28
    • Customs clearance 18
    • Classification and origin 4
    • Sea freight and documents 6
  • Administration 20
    • Accounting 9
    • HR 5
    • IT 4
    • Purchasing 2

Halls, depot and workshop

  • Packing and CFS 96
    • Stuffing and stripping 70
    • Dangerous goods and packing certificate 12
    • Export packaging 14
  • Depot, warehouse and gate 68
    • Gate and damage inspection 10
    • Depot and repair 26
    • Warehouse and customs warehouse 32
  • Engineering and workshop 18
    • Trucks and chassis 10
    • Reach stackers and forklifts 8

8 + 16 + 106 + 28 + 20 + 96 + 68 + 18 = 360 people

Who opens which room

WhoShipments and containersCustomer ratesSubcontractor pricesCustoms declarations and proofs of originDangerous goods dataHR and driving hoursApproves
Sales and customer servicereadsedits––reads–Quote, customer update
Dispatchedits–editsMRN status onlyreadsreads driving hours onlyOrder, route
Customs and sea freightreads––editsreads–Declaration, commodity code
Administration, accountingreadsreadsreads–––Invoice, payment
Packing and CFSown hall–––edits–Packing certificate, VGM
Depot, warehouse and gateedits––customs warehouse onlyreads–Gate, damage report
HR–––––edits, driving hours read-only–
Customer #1702 in the portalownown–ownown–Order
ETA agent, AI coworkerreads––MRN status only––Never
Customs agent, on someone’s behalfAs much as the person who starts it. No more.Never

Every room has keys. They come from your systems and never multiply on their own.

Only the customs department sees the exporters’ invoices and proofs of origin. The customs agent, too, reads them only when someone from the customs department starts it. Driving hours come from the tachograph, and nobody changes them.

An agent carries the keys of the person it works for. An AI coworker has its own, and always a person who is accountable for it. Every access is in the log.

3Intelligence

Five agents do the work, people approve

The agents’ dispatch board: who kicks in when, what it reads, what it does and who signs off.

  1. Quote agent

    Works for the person who starts it

    Trigger
    Someone from sales starts it on a freight request
    Reads
    Request, rates, fuel surcharge, other surcharges, earlier quotes on the same lane
    Does
    Calculates with Nordhanse’s rates, suggests surcharges for ADR, reefer and waiting time, drafts the quote
    Approval
    Sales
  2. Order agent

    AI coworker, accountable: head of dispatch

    Trigger
    Email with an order in the dispatch inbox, as PDF, Excel or free text
    Reads
    Email and attachment, customer master data, releases and slots in the port portal
    Does
    Drafts the transport order, directly in the TMS from month 2, and flags a missing release reference or time window
    Approval
    Dispatch
  3. ETA agent

    AI coworker, accountable: head of customer service

    Trigger
    A ship’s new arrival time, a customs hold, congestion at the terminal
    Reads
    Ship arrivals in the port portal, orders, slots, telematics
    Does
    Recalculates arrival and delivery and drafts the customer update before the customer calls
    Approval
    Customer service
  4. Invoice agent

    AI coworker, accountable: head of accounting

    Trigger
    Invoice from a subcontractor, terminal or depot
    Reads
    Invoice, order, contract, waiting times from telematics, gate times
    Does
    Checks every line, finds surcharges without a contract and duplicate invoices
    Approval
    Accounting; dispatch handles queries
  5. Customs agent

    Works for the person who starts it

    Trigger
    Someone from the customs department starts it on a cut-off list or a shipment
    Reads
    Invoice, packing list, weighbridge, earlier declarations, origin declarations
    Does
    Suggests commodity codes with their source, checks weights and proofs of origin against invoice and packing list, drafts the declaration
    Approval
    Customs department

A freight price is the customer rate from the TMS plus the surcharges from the 40 Excel sheets. The cargo weight is VGM minus tare, and the tare is in the container master data.

Calculations run on Nordhanse’s own rules and data, not in the language model. Anything that goes out or is written back to a system is approved by a person.

The roadmap

Next up: tenders, slots and the box itself

  1. A shipper’s tender

    Hundreds of lanes in one Excel file, 20 and 40 ft, reefer, dangerous goods. demi prices every line with rates and surcharges and shows where capacity falls short.

    O1
  2. Release, slot and driver

    demi puts releases, terminal slots and driving hours side by side and flags demurrage before it accrues.

    O4S5
  3. Gate, depot and packing hall

    Damage from the gate photos, repairs in the depot, the packing certificate for dangerous goods: demi attaches it all to the box.

    S1S2S3

Sources

Why data first, then rights, then AI

60%

Through 2026, Gartner expects organisations to abandon 60% of AI projects that lack AI-ready data.

Gartner · 2025 · on step 1, dataOpen the source (opens in a new tab)
Least privilege

Share sensitive data in LLM apps on a least-privilege basis only, meaning just what a user or process needs.

OWASP GenAI Security Project · 2025 · on step 2, rightsOpen the source (opens in a new tab)
70%

70% of AI’s potential value sits in core functions such as sales, manufacturing and supply chain.

Boston Consulting Group · 2025 · on step 3, intelligenceOpen the source (opens in a new tab)
NordhansePort logistics · Hamburg depotExample company

Nordhanse doesn’t exist. Your company does.

In 20 minutes we show you demi on a case like yours: bring the data together, set the rights, let AI do the work.

Nordhanse AG is made up: a typical port logistics corporation in Logistics & Ports, not a real one. An estimate from our assumptions, not a promise. You can change every number in the configurator.

Your configurator

No use cases yet

Your configurator is still empty

Add a use case from any card or case page and see what it brings per year, with the calculation. Free, no sign-up, no commitment: try it out and change any number.

Browse use cases