Skip to content
Service & spare partsWater & EnvironmentMachinery & Plant EngineeringMetal & MachiningPlastics & Packaging+4

Find obsolete controls in your machine park

demi reads diagrams, parts lists and cabinet photos, lists controllers and drives per machine and flags discontinued types.

Today

Many lines and plants run on controllers, operator panels and drives that their maker discontinued long ago. No list says which ones: the types sit in wiring diagrams from three decades, some only on paper, and in the cabinet itself. When such a controller fails, there is no spare left, and a swap turns into an emergency retrofit lasting weeks.

An example

At Aldevo Wassertechnik, the agent reads wiring diagrams, parts lists and about 2,900 cabinet photos from service visits for 420 filter and UV plants that the company has supplied to waterworks and municipal utilities since 1998 and still services. 71 plants still run on a controller generation its maker no longer supplies, 23 of them also with operator panels for which there are no spares. At the top are eleven plants that are a town's only treatment line and have already stopped twice in two years because of the controller. The service manager schedules their retrofit for the winter, when demand is low, and approves the retrofit quotes to the waterworks.
Fictional company, typical workflow.

Your data, wherever it lives

Which controllers and drives sit in your machines is written today in wiring diagrams as PDFs or on paper in project folders, in parts lists in the ERP, on cabinet photos and in fault tickets, and the delivery status in the makers' discontinuation notices. demi reads, understands and links it all per machine, with your rights. The AI has the list ready in days, a job that otherwise takes weeks of opening cabinets and leafing through binders, and your service manager decides what gets retrofitted first.

Where the data lives today

  • PDFs
  • Scans & paper
  • Folders & drives
  • Photos, video & audio
  • ERP
  • Tickets
  • Web & portals
Data LayerOne view of everything, with your rights

How demi solves it

Three layers in this order: connect the data first, then the rights, then the AI.

  1. 1 · ConnectData Layer

    Data sources in this case: wiring diagrams and parts lists as PDFs and scans, project folders on the file share, photos from control cabinets, fault tickets, the ERP with stock, and the makers' discontinuation notices. demi replaces nothing and links every controller, panel and drive, by order number, to the machine it sits in. Each machine gets a list of its electrics that did not exist before.

  2. 2 · PermitPermission Layer

    Service and maintenance see the machines they are responsible for; machines at a customer site are visible only to that customer's service team. The service manager approves the migration plan and retrofit quotes, and that is recorded.

  3. 3 · ActIntelligence Layer

    The agent reads types and order numbers from wiring diagrams, parts lists and photos of rating plates, old scans included, and flags what it cannot read with confidence. demi matches the delivery status against the makers' discontinuation notices by exact order number. The agent ranks the machines by risk, with criteria you set: what depends on the machine, is there a backup, how often did it stop, is a spare in stock.

How it runs

  1. 1

    demi reads the wiring diagrams, parts lists and cabinet photos of every machine.

  2. 2

    The agent lists controller, operator panel, drives and modules per machine, with order numbers.

  3. 3

    Every order number is checked against the makers' discontinuation notices and your own stock.

  4. 4

    Machines are ranked by risk, each rating with its reasons.

  5. 5

    The service manager sets the order of retrofits and approves plan and quotes.

What changes

  • A complete list of all controllers and drives per machine

  • Retrofits by plan instead of after the failure

  • Spares for old controllers where they matter

What does it bring you?

Check it with your own numbers

Every starting value is an assumption you can change. The calculation sits right below, step by step.

Assumption, editable

Your numbers

Result

+216 hfreed per year

Assumptions and calculation

demi reads diagrams and photos and checks every type against discontinuation notices; you plan the retrofit.

3 h → 1.8 h per case

How does it run today?

What is already digital saves less: the factor lowers the share demi brings.

How we calculate

15 machines × 3 h × 40% × 1.0 (manual) × 12 months = 216 h

Value per year, before demi costs

Freed per year+216 h

Assumption: labour cost of €49.50 per hour in German manufacturing in 2025 (Destatis), plus workplace, IT and overheads.

= Value per year, before demi costs

+€14,040

gained per year

216 h ÷ 1,760 h per role = 0.1 full-time roles

An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.

Combine with more cases and get the package

Questions about this use case

How does demi know which controller sits in a machine?

From wiring diagrams and parts lists, old scans included, and from photos of the rating plates in the cabinet, for example from the next walk-round or service visit. Every entry shows its source. If diagram and photo disagree, the agent shows both and asks.

How does demi know whether a type is still supplied?

From the makers' discontinuation notices and lifecycle lists, as PDFs, e-mails or from the maker's website. The match runs on the exact order number. If a type is ambiguous, the agent says so instead of guessing.

How does demi rate the risk of a machine?

By criteria you set: what depends on the machine, is there a backup, how often did it stop, are spares available in stock or on the market. Every rating shows its reasons; your service manager sets the order.

Does this work for plants at customer sites?

Yes. Many makers know their installed plants only from project folders. demi builds the list per plant from them, and service sees whom to offer a retrofit before the failure comes. Each customer is a separate area.

See this case with your data

In the demo we show you the workflow on your own systems.

Your configurator

No use cases yet

Your configurator is still empty

Add a use case from any card or case page and see what it brings per year, with the calculation. Free, no sign-up, no commitment: try it out and change any number.

Browse use cases