Skip to content
LandrikFarm MachineryExample company

Landrik UK Limited · Peterborough, head office: Lingen (Ems), Germany, since 1931, 3,500 people, 9 sites

Getting started with AI · Agricultural Machinery

How a farm machinery maker gets started with AI

Landrik doesn’t exist. Everything else on this page will feel familiar.

demi turns your systems into one record, carries over your rights and lets AI agents prepare the routine work. First the data, then the rights, then the AI. A person always approves.

What five use cases free up in after-sales

+1,005 h per yearEstimate, not a promise≈ $65,325 per year, calculated cautiously
Spread pattern of the ZW 3,000 l fertiliser spreader with serial number 21-0847, top view: three tramlines 24 meters apart, the spreader with its two discs on the middle one, the spread fan behind it in 16 sections. At the wedge-shaped headland, sections 1 and 2 are switched off. Below it the transverse distribution: the pass and the two neighboring passes add up to an even 200 kilograms per hectare, coefficient of variation 4.8 percent.Adjacent passAdjacent pass11616 sectionsField edgeS 1–2 offDiscs S424 m24 mTransverse spreadwith adjacent passesTotal 200 kg/haCV 4.8 %

Spread chart · CAN 27 % N · 24 m

Slide position by application rate and travel speed, calcium ammonium nitrate, working width 24 m
kg/haPos. at 10 km/hPos. at 12 km/h
1002226
1503035
2003742
2504349
3004956
4006068
Working width
24 m
Application rate
200 kg/ha
Sections
16, TC-SEC
Job computer
3.2.1
Landrik
TitleSpread chart ZW 3,000 l
Serial number21-0847
DealerH-0412, Emsland
DocumentST-ZW-S4
Rev.D
Season2027
The spread pattern of the ZW 3,000 l with serial number 21-0847, spreading in the Emsland since 2021. Every value leads to its source.
LandrikFarm MachineryExample company

Every grain in its place. Since 1931.

3,500 people build spreaders, seed drills, field sprayers and loader wagons, around 160,000 are working in the fields

From village forge to precision

  1. A blacksmith in Lingen builds lime spreaders for the farms on the newly cultivated moorland of the Emsland. Horses still pull them.

  2. The farms grow and buy tractors. Landrik builds its first twin-disc spreader for the three-point linkage. It becomes the ZW series.

  3. The first weighing spreader: load cells measure on the move how much fertiliser actually goes out, and the slide adjusts.

  4. The founder’s granddaughter runs the company in the third generation. Landrik is the world market leader in twin-disc spreaders with weighing technology, and ISOBUS switches the sections at the headland on its own.

Profile

Founded
1931 in Lingen on the river Ems
Ownership
Family-owned, in the third generation
People
3,500 in eight departments, 1,600 of them in manufacturing in Lingen and Poznań. Every department in the org chart
Sites
Head office and plant in Lingen (Ems), one plant in Poznań, seven sales and service companies. All nine in the list
Dealers
85 in Germany, around 700 in 40 countries
Export
71% of revenue outside Germany
Revenue
€910 million
In the field
Around 160,000 machines with a serial number, 94,000 of them fertiliser spreaders
Season
Two thirds of the spare parts go out between February and May
Systems
ERP, CRM, PLM, DMS, dealer portal, telematics, mailboxes

Four product lines

  • ZWFertiliser spreaders1,500 to 4,200 l, 12 to 36 m
  • DSSeed drillsMechanical and pneumatic, 3 to 9 m
  • FSField sprayersMounted and trailed, 15 to 36 m
  • LWLoader wagons28 to 50 m³

Sites

  • PeterboroughUnited KingdomSalesLandrik UK Limited
  • Lingen (Ems)GermanyHead office, engineering and plantLandrik Landtechnik GmbH & Co. KG
  • PoznańPolandPlantLandrik Polska Sp. z o.o.
  • RennesFranceSalesLandrik France SAS
  • Des MoinesUnited StatesSales and serviceLandrik USA, Inc.
  • Cruz AltaBrazilSales and serviceLandrik do Brasil Ltda.
  • KyivUkraineSales and serviceLandrik Ukraine LLC (ТОВ «Ландрік Україна»)
  • KostanayKazakhstanSales and serviceLandrik Kazakhstan LLP (ТОО «Ландрик Казахстан»)
  • BloemfonteinSouth AfricaSalesLandrik South Africa (Pty) Ltd.

The problem

Monday, 7:20 am: a dealer in the Emsland doesn’t want to run out of spreader vanes again in March

The head of spare parts at a farm machinery dealer in the Emsland writes to Landrik. Last spring he pre-ordered 40 spreader vanes and reordered 72 by express. For 2027 he wants a proposal before he confirms his pre-season order by November 27.

He is one of 85 dealers in Germany who are placing pre-season orders now. What his area really needs sits in three places:

In the ERP64 ZW 3,000 l spreaders with a serial number in his area, nine of them delivered since autumn.

In the dealer portalSix open warranty claims with worn vanes, reported with photos.

In telematicsHectares and operating hours of 23 spreaders whose farmers have shared them.

Two planners work through 85 dealers like this, for three weeks. Most pre-season orders go out as a copy of last year’s, and in March the vanes are missing again.

FromSpare parts warehouse, dealer H-0412
ToLandrik spare parts sales
SubjectSpring 2027 pre-season order: please send a proposal by Nov 27
Mail #8114Hello, last spring we ran out of spreader vanes in March, and 72 came by express. This time, please send us a proposal for the pre-season order before we confirm. Last year’s list is attached.

VO-26-0412.xlsx38 line items

What we count for the start, per month

  1. 20dealer pre-season orders
  2. 250spare-part requests
  3. 300questions about a machine
  4. 400manual questions
  5. 150faults

Together that is 4,870 hours a year, about 2.8 full-time roles, and a good half of it falls in the ten weeks before the season. In service, 21 of the 96 technicians reach retirement age by 2030.

What hurts there

  1. 01
    The season does not wait

    In spring every dealer needs spreader vanes, coulters, nozzles and knives at once. If one part is missing, the machine stands still and the farmer loses the weather window.

  2. 02
    Endless dealer questions

    “Which part fits serial number 21-0847? Does the section control run on this tractor’s terminal?” The answers sit in exploded views, tickets and with factory service.

  3. 03
    Knowledge hangs on a few technicians

    Whoever knows a 2009 weighing spreader with today’s job computer is booked solid in spring. What they know is in no system.

What demi does · An example

The proposals for all 85 dealers are ready on day 3, not 14, costed on the machines in the field

  1. The request

    demi reads the email and the list: 38 line items, copied from last year. Plus the dealer, their area and their terms.

    Mail #8114VO-26-0412
  2. The machines in the area

    64 ZW 3,000 l fertiliser spreaders, by serial number from the deliveries. 38 are more than five years old, nine have been added since autumn.

    H-041264 × ZW 3,000 l
  3. The consumption

    Parts consumption per machine over three seasons, plus six open warranty claims with worn vanes from the dealer portal.

    2024 to 2026G-26-0871
  4. The field

    For 23 spreaders the farmers have shared telematics: on average 1,240 hectares per season, more than the year before.

    Telematics23 of 64
  5. The proposal

    110 spreader vanes, 24 agitator fingers, 16 metering slides, every line with a reason and the machines behind it. Across all 85 dealers, parts planning sees: by mid-February, 4,200 vanes must be ready.

    VO-27-0412
  6. The sign-off

    Spare parts sales changes one line and approves. The dealer confirms in the dealer portal, and parts planning tops up the order with the supplier.

    A person approvesLog

The calculation below cautiously counts only 20 pre-season orders a month. Each one gives spare parts sales 33 minutes back, and the dealer has the vanes on the shelf in March.

Office <=> Plant and Field

Where demi works at Landrik: nine of 14 stations

demi can work at all 14 stations. Pick a use case and see which ones it touches.

Office

  1. O1Dealer network & dealer portal1next
  2. O2Dealer request2next
  3. O3Variants & manuals4next
  4. O4Spare parts sales & quote2next
  5. O5Parts planning & season planning1next
  6. O6Engineering & ISOBUS software5next
  7. O7Purchasing & suppliers next
One record. Every fact runs both ways.

Plant and Field

  1. S4Spare parts warehouse & shipping1next
  2. S5Service & dealer workshop3 4 5next
  3. S6Machines in the field3next
  • demi works here
  • Next at Landrik
  • demi can work here too
  • Path of pre-season order VO-27-0412: from the machines in the field via parts planning to the spare parts warehouse

The payoff

Example calculation: five use cases free up 1,005 hours a year

≈ $65,325 per yearEstimate, not a promise
StartUse caseVolume per monthShareToday per yearFreed upValue per year
1Plan spare parts per dealer before the seasonSpare parts20 × 3 h30%720 h130 h$8,450
2Spare-part quote from a rating plate photoSpare parts250 × 20 min40%1,000 h240 h$15,600
3Find every machine by serial numberService300 × 10 min40%600 h144 h$9,360
4Manual answers right at the machineService400 × 15 min40%1,200 h288 h$18,720
5From the error code on the terminal to the causeService150 × 45 min25%1,350 h203 h$13,195
Total4,870 h1,005 h$65,325

Of 4,870 hours, we count 1,005: volume times time times twelve months, then only the cautious share of that, times 0.6 for partly digital processes. That is about 0.6 full-time roles. Calculated at $65 per hour: $48.62 labor cost in US manufacturing in June 2026 (BLS), plus workplace, IT and overhead. The volumes are starting values for the team in Lingen, before the country companies join. A number doesn’t fit your company? You can change every one of them in the configurator.

The start

How Landrik starts: pre-season orders first, then service

Which systems and use cases join in the first 90 days
The first 90 daysDay 1Week 1Weeks 2 to 4Months 2 and 3
Systems
Mailboxes, dealer portalSpare parts and service mailboxes, pre-season orders and warranty claims in the portal, read-only
ERP, PLMRead-only, via a small connector in their own network
CRM, DMSRead-only
TelematicsRead-only, shared machines only
Use cases
1 Pre-season order per dealerWith sign-off. Part of daily work before spring
2 Spare-part quoteWith sign-off
3 Machines in the fieldWith sign-off
4 Manual questionsWith sign-off
5 Fault diagnosisWith sign-off
Writing back
Into the ERP and the dealer portalAfter sign-off

Why pre-season orders first

Because the season does not wait: by the end of November, 85 dealers confirm what will be on their shelves in March. The calculation counts 130 hours a year for it, and the bigger value lies in spring, with no express freight and no machine standing still. Pre-season orders only need read access: mailbox and dealer portal from day 1, ERP and PLM from week 1. Every proposal stays in-house until spare parts sales and the dealer approve it. Service follows in week 2, once demi knows every machine by serial number.

The entry plan for your company

What Landrik does itself

  • Head of ITTwo days for the connections
  • Head of spare parts salesOne hour a week
  • Parts planningTwo weeks of reviewing proposals, alongside normal work

1 Data

Seven systems become one record

1,319entries
1,468links
7systems

An excerpt from Landrik’s record.

Connected

  • ERP
    Deliveries with serial number, parts consumption, stock, orders, pricesA machine is a delivery to the dealer. Where it runs afterwards, the ERP doesn’t know
  • CRM
    Dealers, areas, farms, contactsThe same farm as a customer of two dealers
  • PLM
    BOMs per variant, exploded views, changes, successor partsOnly engineering knows the as-delivered BOM
  • DMS
    Operator’s manuals, spare parts catalogs, spread charts, service bulletinsSix revisions of the same manual in 24 languages
  • Dealer portal
    Pre-season orders, dealer stock, warranty claims, photosEvery dealer maintains what they want, when they want
  • Telematics
    Operating hours, hectares, error codes, job computer software versionOnly for machines whose farmer shares it
  • Mailboxes
    Dealer requests, rating plate photos, queries from techniciansThat’s where the real questions are

Nothing gets replaced. Running a different ERP? demi connects to everything, from SAP and Oracle to the specialist software from the next town. At first, demi only reads. A person connects a system after seeing who will read what.

Held together

The same machine. Seven systems. Now one entry.
Serial number 21-0847ERP, delivery to H-0412, March 2021
Dealer H-0412, area Emsland NorthCRM
Spread chart ST-ZW-S4DMS
Revision DDMS, valid from season 2026
Working width 24 mPLM, equipment disc S4
16 sections, ISOBUS TC-SECPLM, as-delivered BOM
Job computer 3.2.1Telematics, as of Oct 14, 2026
BOM STL-ZW30-21-0847PLM, as delivered
Warranty claim G-26-0871Dealer portal, with four photos
Pre-season order VO-27-0412Dealer portal, Mail #8114
Target, spread chart200 kg/ha at pos. 42ST-ZW-S4, revision D, page 3
Actual, calibration test196 kg/haJob computer 21-0847, Mar 12, 2026

Linked

Farm B-117 in Haselünne fertilises with spreader 21-0847, a ZW 3,000 l from dealer H-0412, around 1,240 ha a year.

Who?

Dealers, farms, teams

  • H-0412Farm machinery dealer in the Emsland, organization with the relationship “dealer since 1998”
  • B-117Arable farm in Haselünne, customer of H-0412
  • OE-AS-ETVSpare parts sales

CRMsold by H-0412

What kind?

Series and BOMs

  • ZW 3,000 lTwin-disc spreader with weighing technology
  • S4Spreading disc for 18 to 36 m
  • STL-ZW30-CAs-delivered BOM
  • ZW-41-220Spreader vane, fitted in 9,400 spreaders

PLM, ERPis a ZW 3,000 l with disc S4

Where?

Areas and farms

  • GB-EMS-NArea Emsland North, 64 spreaders
  • B-117-HLFarm in Haselünne

CRMworking in area Emsland North since 2021

What’s happening?

Service calls and warranty claims

  • SE-26-1932Service call: load cell recalibrated
  • G-26-0871Warranty claim: vanes worn

ERP, dealer portalcase on this machine

Which one exactly?

Serial number 21-0847

The spreader in the field, delivered in 2021

  • TS-21-0847Rating plate, year of manufacture 2021
  • Working at farm B-117 and now part of its dealer’s pre-season order calculation.

ERPdelivered under serial number

What applies?

Pre-season orders, terms, contracts

  • VO-27-0412Pre-season order spring 2027
  • VO-26-0412Last year’s pre-season order
  • KD-0412-27Dealer terms 2027

Dealer portal, ERPpre-season order for this area

What’s in writing?

Emails, manuals, versions

  • Mail #8114Request for a proposal
  • BA-ZW30-DOperator’s manual, revision D
  • SW 3.2.1Job computer software version

Mailboxes, DMS, telematicsis about this machine

What should it be?

Specifications

  • ST-ZW-S4Spread chart: 200 kg/ha CAN at pos. 42
  • SM-26-014Service bulletin: check vanes after 1,500 ha

DMSspecification for this machine

What do we conclude?

Findings

  • F-26-044Vanes last 1,300 ha on average in the area, not 1,800 as in the catalog

demifinding about this machine

At the pump maker, the pump with its serial number sits in the middle; at the logistics company, the shipment; at the machine builder, the line at the customer’s site. At Landrik, it is the spreader in the field. The grid stays, the middle changes.

What it can do

  • Recognize

    Serial number 21-0847, “the new spreader from Haselünne” in the dealer’s email and “ZW30-0847” in telematics are the same machine.

  • Unify

    Application rate in kg/ha, dt/ha or kilograms per pass becomes one value in kg/ha.

  • Trace

    Every value shows its source, exact location and version. Unclear rows are kept too.

  • Look back

    The as-delivered BOM, with disc S4, not the one in the catalog.

  • Write back

    After sign-off, the pre-season order lands in the dealer portal and the ERP.

2 Rights

The org chart becomes the permission system

What only spare parts sales sees in the ERP, only spare parts sales sees in demi. Every dealer sees only their own machines and terms, and telematics data flows in only where the farmer has shared it.

3,500 people, eight departments

Left to right, the way a spreader travels from the dealer to the plant and back to the field.

Management and staff functions 150Management 4 · Finance and controlling 52 · HR 38 · IT 44 · Legal and assistants 12
  • 1Sales and dealer network 260
    • Regional sales 96
    • Dealer support & inside sales 104
    • Product management 60
  • 2Engineering 510
    • Mechanical 220
    • Electronics & ISOBUS software 180
    • Testing & spreading hall 110
  • 3Purchasing and logistics 310
    • Purchasing 90
    • Parts planning 70
    • Plant logistics & shipping 150
  • 4Manufacturing 1,600
    • Lingen plant 940
    • Poznań plant 660
  • 5After-sales 380
    • Spare parts sales 110
    • Spare parts warehouse 140
    • Service 96
    • Warranty 34
  • 6Country companies 160
    • Europe 70
    • Americas 56
    • Kazakhstan, South Africa 34
  • ·Quality and technical writing 130
    • Quality management 74
    • Technical writing 56

150 + 260 + 510 + 310 + 1,600 + 380 + 160 + 130 = 3,500 people

Who opens which room

WhoMachines in the fieldBOMs & manualsDealer termsCosting & marginsTelematicsHRApproves
Regional salesreadsreadsown area–shared–Dealer contract
Spare parts salesreadsreadseditseditsshared–Pre-season order, spare-part quote
Parts planningreadsreads––––Supplier order
Serviceeditsreadsreads–per service call–Service call
Engineeringreadsedits––shared–Change, service bulletin
Warrantyreadsreadsreads–per claim–Warranty decision
HR–––––edits–
Dealer H-0412 in the portalownown manualsown–own customers, shared–Confirm pre-season order
Machine agent, AI coworkerreadsreads––shared–Never
Pre-season order agent, on someone’s behalfAs much as the person who starts it. Never more.Never

Every room has keys. They come from your systems and never multiply on their own.

Only the people who do the costing see margins. A dealer sees their own terms, never another dealer’s.

An agent carries the keys of the person it works for. An AI coworker has its own, and always a person who is accountable for it. Every access is in the log.

3 Intelligence

Five agents do the work, people approve

  1. Pre-season order agent

    Works for the person who starts it

    TriggerSomeone in spare parts sales starts it for one dealer or a whole area
    ReadsDeliveries by serial number, parts consumption, warranty claims, earlier years’ pre-season orders, shared telematics
    DoesCalculates a pre-season order per dealer, every line with a reason and the machines behind it, and totals them for parts planning
    Sign-offSpare parts sales, then the dealer
  2. Spare parts agent

    AI coworker, accountable: head of spare parts sales

    TriggerA dealer email with a rating plate photo or an old part number
    ReadsMachine file, as-delivered BOM, exploded views, stock, dealer terms
    DoesReads the serial number from the plate, finds the part in exactly this BOM, checks successors and stock and drafts the quote
    Sign-offSpare parts sales
  3. Machine agent

    AI coworker, accountable: head of service

    TriggerA question about a serial number, a new service call
    ReadsDeliveries, BOMs, job computer software versions, service calls, warranty claims
    DoesKeeps the file for each machine and lists all machines with a particular part or software version
    Sign-offService confirms gaps
  4. Manual assistant

    AI coworker, accountable: head of technical writing

    TriggerA technician’s question by phone, with a serial number
    ReadsOperator’s manuals, spread charts, service bulletins, spare parts catalogs of the variant
    DoesAnswers from exactly this machine’s manual, with page, revision and picture. If something is missing, it says so
    Sign-offTechnical writing approves content
  5. Diagnosis agent

    Works for the technician who starts it

    TriggerAn error code on the terminal, with a serial number
    ReadsError code lists, wiring diagrams, job computer software versions, earlier service calls
    DoesRanks the likely causes by earlier cases and walks through the check step by step
    Sign-offTechnician confirms cause and fix

Every pre-season order proposal follows the dealer terms and planning rules in Landrik’s ERP.

Calculations run on Landrik’s own rules and data, not in the language model. Anything that goes out or is written back to a system is approved by a person.

The roadmap

Next: warranty, final test and seasonal production

  1. Pre-check warranty claims

    In spring the dealers’ claims arrive in stacks: photos, operating hours, serial number. demi checks each one against delivery, warranty period, proof of service and known faults, and proposes the decision with reasons. Warranty decides.

    O8
  2. Final test and spreading hall

    Every spreader goes over the test bench before delivery, every new disc through the spreading hall. The measurements land in the machine’s file, not in a spreadsheet. Then service knows the as-built state, and every spread chart has its measurement.

    S3
  3. Seasonal production

    The dealers’ pre-season orders show early which variants will be in demand in spring. Parts manufacturing and assembly in Lingen and Poznań plan with them, in the same record.

    S1S2

Sources

Why data first, then rights, then AI

60%

Gartner expects that through 2026, organizations will abandon 60% of AI projects that lack AI-ready data.

Gartner · 2025 · on step 1, dataOpen the source
Least privilege

Expose sensitive data in LLM apps only on a least-privilege basis: only what the user or process needs.

OWASP GenAI Security Project · 2025 · on step 2, rightsOpen the source
70%

70% of AI’s potential lies in core functions such as sales, production and the supply chain.

Boston Consulting Group · 2025 · on step 3, intelligenceOpen the source

All sources

LandrikFarm MachineryExample company

Landrik doesn’t exist. Your company does.

In 20 minutes we show you demi on a case like yours: bring the data together, set the rights, let AI do the work.

Landrik does not exist: a made-up example company from agricultural machinery, not a real one. The companies, dealers and farms on this page are made up too. An estimate from our assumptions, not a promise. You can change every number in the configurator.

Your configurator

No use cases yet

Your configurator is still empty

Add a use case from any card or case page and see what it brings per year, with the calculation. Free, no sign-up, no commitment: try it out and change any number.

Browse use cases