Skip to content
Service & spare partsMachinery & Plant EngineeringConveying & IntralogisticsMining & Raw MaterialsWaste & Recycling+2

Digitize inspection logbooks and machine files

Crane logbooks, maintenance booklets and repair notes become a searchable history per asset, with finding, inspector and next due date.

Today

The history of every asset lives in logbooks, maintenance booklets and repair notes in the workshop office. Before each inspection someone gathers the paperwork, and whether a defect from the last inspection was fixed is often known only to the fitter who fixed it. Damage that comes back every few years goes unnoticed.

An example

At Nordhanse, the agent reads the logbooks and maintenance booklets of 14 reach stackers and 22 spreaders covering twelve years, around 3,800 pages. On reach stacker RS 45 t, unit 07, it finds the same crack at the boom head three times, welded each time but never noted as recurring, plus a defect from the last inspection with no completion note. The workshop manager orders a crack test before the inspector arrives in March.
Fictional company, typical workflow.

Your data, wherever it lives

The history of your assets sits in paper logbooks and maintenance booklets, on repair notes in binders, in the inspection provider's PDF reports on the drive and in workshop spreadsheets. demi reads, understands and links them per asset, with your rights. Before every inspection, the AI pulls history, open defects and due dates together in minutes, and your workshop manager decides what to do.

Where the data lives today

  • Scans & paper
  • Folders & drives
  • PDFs
  • Office files
Data LayerOne view of everything, with your rights

How demi solves it

Three layers in this order: connect the data first, then the rights, then the AI.

  1. 1 · ConnectData Layer

    Data sources in this case: scanned logbooks and maintenance booklets, PDF reports from the inspection provider, workshop folders and spreadsheets. demi replaces nothing and assigns every entry to the right asset by unit, inventory or serial number. Each entry keeps the image snippet of the original page.

  2. 2 · PermitPermission Layer

    The workshop and asset owners see the files of their assets. An external inspector gets read-only access to the assets they inspect, and history and deadlines enter the maintenance system only after the workshop manager confirms. Every access is recorded.

  3. 3 · ActIntelligence Layer

    The agent reads date, finding, action, inspector and signature, handwriting included, and builds a timeline per asset. demi computes the next due date from the last recorded inspection and the defined interval, not by estimate. It flags open defects without a completion note and recurring findings.

How it runs

  1. 1

    Logbooks, maintenance booklets and repair notes are scanned or photographed page by page.

  2. 2

    The agent reads date, finding, action and inspector and assigns each entry to its asset.

  3. 3

    Each asset gets a history, every entry with the snippet of the original page.

  4. 4

    Open defects, recurring findings and the next due date are flagged.

  5. 5

    The workshop manager confirms and moves history and deadlines into the maintenance system.

What changes

  • The history of every asset at a glance

  • Open defects no longer stay buried in the logbook

  • Inspections prepared without searching

What does it bring you?

Check it with your own numbers

Every starting value is an assumption you can change. The calculation sits right below, step by step.

Assumption, editable

Your numbers

Result

+108 hfreed per year

Assumptions and calculation

demi gathers history, open defects and the due date per asset; you prepare the inspection with it.

45 min → 27 min per case

How does it run today?

What is already digital saves less: the factor lowers the share demi brings.

How we calculate

30 asset inspections × 45 min × 40% × 1.0 (manual) × 12 months = 6,480 min = 108 h

Value per year, before demi costs

Freed per year+108 h

Assumption: labor cost of $48.62 per hour in US manufacturing in June 2026 (BLS), plus workplace, IT and overhead.

= Value per year, before demi costs

+$7,020

gained per year

108 h ÷ 1,760 h per role = 0.1 full-time roles

An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.

Combine with more cases and get the package

Questions about this use case

Can demi read old handwritten logbooks?

Yes, faded entries, stamps and initials included. Every entry read shows the snippet of the original page, so you can check it at a glance. What the agent cannot read with confidence, it puts forward for confirmation instead of guessing.

How does demi assign an entry to the right asset?

By unit, inventory or serial number, as written in the logbook, on the report or in the maintenance system. If the number is missing or fits several assets, the agent asks. A confirmed assignment then applies to all further pages.

Does the paper logbook remain the original?

Yes. demi makes the entries searchable and links them; the original stays where it is, and every entry points to it. Whether you keep the logbook digitally from now on is something you settle with your inspector.

Which assets is this suited for?

Any asset with an inspection or maintenance history on paper: cranes and hoists, forklifts and reach stackers, lifting accessories, pressure vessels, gates, presses and vehicles. What matters is a number that ties the entries to the asset.

See this case with your data

In the demo we show you the workflow on your own systems.

Your configurator

No use cases yet

Your configurator is still empty

Add a use case from any card or case page and see what it brings per year, with the calculation. Free, no sign-up, no commitment: try it out and change any number.

Browse use cases