Skip to content
Product data & engineeringPumps & ValvesElectronics & SensorsMachinery & Plant EngineeringPlastics & Packaging+3

Test videos: find the leak, crack or break to the second

AI finds the second the seal gives way in test bench footage and links it to test, sample and measurement curve.

Today

Test benches film day and night: high-speed footage of burst and drop tests, endurance runs over weeks. The videos land as terabytes on NAS drives, named by date and camera, with no link to test, sample or requirement. When a customer reports a leak, someone searches for days for the moment the seal let go, or never finds it.

An example

Arnstein keeps about 40 TB of test bench video on two NAS drives. A customer reports leaks on AlSi10Mg housings, and the test engineer asks for every pressure cycle test with the current seal geometry. The agent finds 14 tests, marks the first escape of test fluid in three videos at cycles 212,000, 248,000 and 251,000, and shows the pressure curve and sample revision alongside.
Fictional company, typical workflow.

Your data, wherever it lives

Test videos sit as terabytes on NAS drives and hard disks, named by date and camera; test orders live in the test database, samples and drawing revisions in the PLM, the benches' measurement data in folders next to them. demi reads these sources, recognises which video belongs to which test and links it to sample, requirement and measurement curve, with your rights. AI finds the decisive second in minutes, and your test lab decides whether it was a failure.

Where the data lives today

  • Photos, video & audio
  • Folders & drives
  • NAS & hard disks
  • PLM
  • Databases
Data LayerOne view of everything, with your rights

How demi solves it

Three layers in this order: connect the data first, then the rights, then the AI.

  1. 1 · ConnectData Layer

    The case needs data from the file share, test database, PLM and DMS. demi replaces nothing and links every video to test bench, test order, sample and drawing revision, plus the bench's measurement data on the same time axis. Test reports and the requirements from the specification hang on the same test.

  2. 2 · PermitPermission Layer

    Test videos are visible only to the project team and the test lab; footage of customer samples under NDA stays within that group. A clip for the customer or a complaint is released by the lab manager, and every access is recorded.

  3. 3 · ActIntelligence Layer

    The agent reviews the footage and proposes events such as leak, crack, break or smoke with time stamp and still image. Cycle, pressure and temperature are read unchanged from the bench log, not from the picture. Whether an event is a failure is confirmed by the test lab.

How it runs

  1. 1

    demi connects the video storage and assigns every video to test bench, test and sample.

  2. 2

    The agent reviews the footage and marks events such as leak, crack, break or smoke with time stamp and still image.

  3. 3

    Each time stamp shows cycle, pressure and temperature from the bench log.

  4. 4

    You search across all tests in your own words and get the matching moments, not whole videos.

  5. 5

    You confirm the events and take still image and reading into the test report.

What changes

  • The decisive second of every test found at once

  • Every video linked to test, sample and requirement

  • Evidence for customer, audit and complaint close at hand

What does it bring you?

Check it with your own numbers

Every starting value is an assumption you can change. The calculation sits right below, step by step.

Assumption, editable

Your numbers

Result

+144 hfreed per year

Assumptions and calculation

demi marks events with a time stamp and links the video to test and sample; you confirm.

60 min → 42 min per case

How does it run today?

What is already digital saves less: the factor lowers the share demi brings.

How we calculate

40 test videos × 60 min × 30% × 1.0 (manual) × 12 months = 8,640 min = 144 h

Value per year, before demi costs

Freed per year+144 h

Assumption: labour cost of €49.50 per hour in German manufacturing in 2025 (Destatis), plus workplace, IT and overheads.

= Value per year, before demi costs

+€9,360

gained per year

144 h ÷ 1,760 h per role = 0.1 full-time roles

An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.

Combine with more cases and get the package

Questions about this use case

Which events does demi recognise in test videos?

Anything visible in the picture that can be described: escaping fluid, cracks, breaks, smoke, deformation, discolouration or a part coming loose. You define what counts as an event in your tests. Each event is a proposal with time stamp and still image, which your test lab confirms or rejects.

Does it work with high-speed footage and endurance runs over weeks?

Yes. The agent reads high-speed footage frame by frame; long endurance runs it scans for changes in the picture and looks closer there. What matters is the recording time, so video and bench log line up.

Do we have to rename or move the videos first?

No. The videos stay where they are, on the NAS or drive. demi assigns them by time, test bench and test order; where that is ambiguous, the agent asks. We work out with you how the storage is connected.

Who may see confidential test videos?

Only people cleared for it in the project or the test lab. Footage of customer samples under NDA stays within that group. A clip for the customer is released by the lab manager, and every access is recorded.

See this case with your data

In the demo we show you the workflow on your own systems.

Your configurator

No use cases yet

Your configurator is still empty

Add a use case from any card or case page and see what it brings per year, with the calculation. Free, no sign-up, no commitment: try it out and change any number.

Browse use cases