Today
Thirty forklifts, half of them idle for most of the shift, and still extra trucks are rented for the season. Leased forklifts run past their agreed annual hours; impacts on racks and doors get repaired but never analysed. The annual inspections sit in one binder, operator permits, written authorisations and safety briefings in another. Nobody can say at the push of a button whether everyone driving today is allowed to.
An example
Tannried Möbelwerk runs 22 forklifts, counterbalance trucks, sideloaders and four-way trucks for panels, 6 of them leased and 2 rented for the season. After four weeks the agent shows: 7 forklifts run less than 90 minutes per shift, including both rentals, and leased truck L-04 is heading for 1,640 operating hours a year against 1,200 agreed. In the panel store there were 11 impacts, 8 of them at the same aisle corner on the late shift. In May 9 annual inspections are due, which the agent puts on one visit of the service technician, and for two drivers the last safety briefing was more than twelve months ago. The warehouse manager returns one rental and swaps L-04 with a little-used truck from shipping; the safety officer has the aisle corner secured.
Your data, wherever it lives
Your forklift fleet's data is scattered today: hours and impacts in the telematics portal, fault codes in the trucks, inspection reports on paper, as scans or in the DMS, repairs with maintenance, lease contracts in the ERP, permits and safety briefings in the HR system or an Excel list. demi reads, understands and links it per forklift and per person, with your rights. The AI shows in minutes which trucks you don't need, what is due and who may drive, and warehouse management decides.
Where the data lives today
- Telematics
- Machines & sensors
- HR system
- DMS & archive
- ERP
- Office files
- Scans & paper
How demi solves it
Three layers in this order: connect the data first, then the rights, then the AI.
- 1 · ConnectData Layer
The case needs data from forklift telematics, the trucks' controllers, maintenance, the HR system and the ERP. demi replaces nothing and joins operating, drive and lift hours, impact alerts, fault codes, inspection reports, repairs, lease contracts and driver permits into one file per forklift and per driver.
- 2 · PermitPermission Layer
Utilisation and costs are visible to warehouse and logistics management and controlling. demi shows impacts per forklift, area and shift; linked to a person only as far as your works agreement allows, and only for safety and supervisors. Driver permits are visible to HR, safety and the line manager concerned. Only an authorised person changes the access list of a forklift, and every change is recorded.
- 3 · ActIntelligence Layer
The agent calculates utilisation per forklift and shift exactly from telematics hours and shows trucks that hardly run and leased trucks heading for more hours than the contract allows. It finds clusters of impacts by place and time, puts due annual inspections on one visit of the service technician and checks every driver card against permit, written authorisation and safety briefing. From that it proposes swaps, returns or blocks; the warehouse manager decides.
How it runs
- 1
demi reads telematics, truck data, inspection reports, lease contracts and driver permits and opens a file per forklift.
- 2
After four weeks the agent shows utilisation per forklift and shift and the hours against the lease contract.
- 3
It groups impacts by place, time and truck, with the repair costs alongside.
- 4
Inspections and safety briefings that fall due are flagged weeks ahead, with a proposed date.
- 5
Warehouse management and safety decide on returns, swaps, measures at the racks and permits.
What changes
Fewer forklifts and rentals for the same work
Annual inspections and safety briefings flagged in good time
Impact hotspots found before someone gets hurt
What does it bring you?
Check it with your own numbers
Every starting value is an assumption you can change. The calculation sits right below, step by step.
Your numbers
Result
+96 hfreed per year
Assumptions and calculation
demi calculates utilisation and deadlines per forklift and checks permits; the warehouse manager decides.
30 min → 18 min per case
How we calculate
40 forklift and driver checks × 30 min × 40% × 1.0 (manual) × 12 months = 5,760 min = 96 h
Value per year, before demi costs
Freed per year+96 h
Assumption: labour cost of €49.50 per hour in German manufacturing in 2025 (Destatis), plus workplace, IT and overheads.
= Value per year, before demi costs
+€6,240
gained per year
96 h ÷ 1,760 h per role = 0.1 full-time roles
An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.
Combine with more cases and get the packageQuestions about this use case
What data do our forklifts actually provide?
That depends on the equipment. With telematics and access control you get operating, drive and lift hours, log-ins by card or PIN and impact alerts; some trucks also report fault codes and battery state. For forklifts without telematics the agent takes the hour meter readings from service reports and shows that these values come in less often.
Does this monitor the drivers?
Not to check their work. demi analyses impacts and utilisation per forklift, area and shift to improve the fleet, routes and racks. What may be linked to a person and who sees it is set by your works agreement, and demi follows those rules.
How does demi check whether someone may drive?
The agent matches every driver card in the access control with the HR records: operator permit, written authorisation by the company, last safety briefing and, where needed, training on special trucks such as sideloaders. If something is missing or a briefing falls due, it tells the line manager and safety, with a proposed date.
Can demi block a forklift for a driver?
demi proposes the block and gives the reason, such as a missing safety briefing. Only an authorised person may change the access list, and every block and release is recorded.
