Skip to content
Planning & productionWater & EnvironmentMining & Raw MaterialsWaste & RecyclingEnergy & Utilities+2

Do the plant round by voice, not on paper forms

Readings and observations are spoken into the phone on the round; demi fills in the sheet, checks limits and flags anything unusual at once.

Today

Plant rounds are ticked off on a clipboard and typed in at the end of the shift, if at all. An unusual reading, a dripping seal or a new noise ends up hours later in a spreadsheet that nobody compares with the last round. When a local gauge disagrees with the control system, often only the next failure shows it.

An example

On the night shift at Orvelon, the operator walks through the tank farm at 2:40 am and says at tank T-311: “Local level 62 percent, control system shows 71.” The agent spots the mismatch, attaches the trend of the last ten rounds and alerts the shift supervisor to a possible fault in level transmitter LT-311. The same round notes that the mechanical seal on pump P-112 is dripping, for the third time this week. The shift supervisor confirms both notifications, and they reach maintenance at 2:55 am, not at the 6 am handover.
Fictional company, typical workflow.

Your data, wherever it lives

Your plant rounds live today on clipboards and paper sheets that are typed into spreadsheets at the end of the shift; control system values, the shift log and maintenance notifications each sit somewhere else. demi reads, understands and links them per measuring point, with your rights, and captures what is spoken right on the round. An unusual reading reaches the shift supervisor in seconds instead of hours later at the handover, and the supervisor decides what happens.

Where the data lives today

  • Phone & voice
  • Photos, video & audio
  • Scans & paper
  • Office files
  • Machines & sensors
  • Tickets
Data LayerOne view of everything, with your rights

How demi solves it

Three layers in this order: connect the data first, then the rights, then the AI.

  1. 1 · ConnectData Layer

    Data sources in this case: round plans and limit lists, control system exports, the shift log and maintenance orders. demi replaces nothing and links every spoken entry with its station, measuring point, limit, the control system value at the same moment and earlier rounds. Photos of leaks or damage sit directly on the station.

  2. 2 · PermitPermission Layer

    Operators see their own round; shift supervisors and plant management see all rounds of their plants. Only authorised people change limits, through your plant's change procedure. A maintenance notification goes out only after the shift supervisor confirms it; voice recordings are kept only as long as your works agreement allows and are never used to monitor performance.

  3. 3 · ActIntelligence Layer

    The agent picks out measuring points, numbers and units even through plant noise and in several languages, maps them to the round sheet and queries any value that is unclear or implausible straight away. Limits are checked with fixed rules, not by the language model. It compares every value with the control system and the trend of recent rounds and drafts the alert to the shift supervisor when something stands out.

How it runs

  1. 1

    The operator starts the round on the phone and speaks readings and observations at each station.

  2. 2

    The agent enters everything in the round sheet and asks at once if something is unclear.

  3. 3

    Each value is checked against its limit, the control system and recent rounds.

  4. 4

    If something stands out, the shift supervisor gets an alert with the value, a photo and a draft maintenance notification.

  5. 5

    The supervisor confirms the alert, and the finished round goes into the shift log.

What changes

  • Unusual readings reported in minutes, not at the end of the shift

  • No more typing up paper sheets

  • Trends per measuring point across every round

What does it bring you?

Check it with your own numbers

Every starting value is an assumption you can change. The calculation sits right below, step by step.

Assumption, editable

Your numbers

Result

+162 hfreed per year

Assumptions and calculation

demi fills in the round sheet from what is spoken and checks the values; you confirm the alerts.

15 min → 10.5 min per case

How does it run today?

What is already digital saves less: the factor lowers the share demi brings.

How we calculate

180 plant rounds × 15 min × 30% × 1.0 (manual) × 12 months = 9,720 min = 162 h

Value per year, before demi costs

Freed per year+162 h

Assumption: labour cost of €49.50 per hour in German manufacturing in 2025 (Destatis), plus workplace, IT and overheads.

= Value per year, before demi costs

+€10,530

gained per year

162 h ÷ 1,760 h per role = 0.1 full-time roles

An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.

Combine with more cases and get the package

Questions about this use case

Does demi understand readings over the noise of the plant?

Yes. The agent listens specifically for measuring point names, numbers and units and uses the noise suppression of the phone or headset. If a value is unclear, it asks right away, for example “1.8 or 8.1 bar?” Typing works at any time too.

Can the phone go into the Ex zone?

demi runs on the devices your plant has approved for each zone, such as explosion-proof smartphones or tablets. Which devices are allowed where is set by your explosion protection document; demi changes nothing about that.

Where does demi get the limit for each measuring point?

From your approved round plans, limit lists and operating instructions. The check runs on fixed rules, and every alert names the limit and the document it comes from. New or changed limits apply only after release.

What happens to the operators' voice recordings?

They stay attached to the entry so the shift supervisor can listen again if needed, and are deleted after the period your works agreement sets. Plants and measuring points are evaluated, not people. Who sees what follows the roles in your plant.

See this case with your data

In the demo we show you the workflow on your own systems.

Your configurator

No use cases yet

Your configurator is still empty

Add a use case from any card or case page and see what it brings per year, with the calculation. Free, no sign-up, no commitment: try it out and change any number.

Browse use cases