Skip to content
Knowledge & documentationWater & EnvironmentMachinery & Plant EngineeringMetal & MachiningPlastics & Packaging+4

Ask the machine

Everything about one machine in one chat: manual, wiring diagram, faults, conversions, spare parts and parameters, every answer sourced.

Today

The history of a machine is spread over binders in the control cabinet, the maintenance system, e-mails with the maker and the heads of two technicians. When the line stops at night, the shift electrician searches the manual of the original build, although the machine was converted long ago, or calls the colleague who knows it. If that colleague is off, the machine stands longer than it needs to.

An example

On the night shift at Wattaris, the foil winding machine for the low-voltage windings of the 630 kVA transformers stops with the message “strip edge out of tolerance”. The shift electrician asks demi on the tablet. The answer draws on five sources: the same message came up four times in two years, and three times the edge sensor was dirty. Since a 2023 conversion a different sensor type is fitted, and its calibration is on page 12 of the retrofitter's manual, not in the original one. Diagram sheet 14 shows the terminal, and the ERP shows a spare sensor in stock, bin C-07. After 40 minutes the machine runs again, and in the morning maintenance confirms the note on the cause.
Fictional company, typical workflow.

Your data, wherever it lives

What you need to know about a machine sits today in manuals and wiring diagrams in the DMS and on the file share, in faults and work orders of the maintenance system, in e-mails with the maker, in parameter backups and in ERP stock. demi reads, understands and links everything per machine, with your rights. At the machine, the AI answers in seconds what used to take a call to the experienced colleague, and the technician decides what to do.

Where the data lives today

  • DMS & archive
  • Folders & drives
  • PDFs
  • Scans & paper
  • Tickets
  • E-mails
  • Machines & sensors
  • ERP
Data LayerOne view of everything, with your rights

How demi solves it

Three layers in this order: connect the data first, then the rights, then the AI.

  1. 1 · ConnectData Layer

    Data sources in this case: the maintenance system, the DMS and file share with manuals, wiring diagrams and parameter backups, the ERP, e-mails with makers and retrofitters, and the machine's own fault messages. demi replaces nothing and attaches everything to the one machine by asset, type and serial number, conversions and retrofits included. Every machine gets a file you can ask.

  2. 2 · PermitPermission Layer

    Every answer comes only from sources the person asking may see: purchase prices stay with purchasing, contractors see only the machines of their job. New findings from a breakdown enter the machine file as a note only after maintenance confirms them, and that is recorded.

  3. 3 · ActIntelligence Layer

    The agent answers questions in everyday language, on a tablet, a phone or by voice at the machine, and names the document and page, diagram sheet or work order behind every statement. It tells the original build from the conversion and says when sources contradict each other or something is missing. What is done at the machine is the technician's decision.

How it runs

  1. 1

    You ask about the machine, typed or spoken: what does this message mean, what was replaced last?

  2. 2

    The agent identifies the machine with its serial number, conversions and valid parameter set.

  3. 3

    It searches the manual, wiring diagram, fault history, e-mails and stock of exactly this machine.

  4. 4

    The answer comes with sources: page, diagram sheet, work order, storage bin.

  5. 5

    Maintenance confirms what the technician finds at the machine as a note in the machine file.

What changes

  • Faster fault clearing, also at night and at weekends

  • Experienced technicians' knowledge stays with the machine

  • Conversions and deviations from the manual are not lost

What does it bring you?

Check it with your own numbers

Every starting value is an assumption you can change. The calculation sits right below, step by step.

Assumption, editable

Your numbers

Result

+180 hfreed per year

Assumptions and calculation

demi pulls together manual, history and spare part for the machine; the technician decides.

25 min → 17.5 min per case

How does it run today?

What is already digital saves less: the factor lowers the share demi brings.

How we calculate

120 machine questions × 25 min × 30% × 1.0 (manual) × 12 months = 10,800 min = 180 h

Value per year, before demi costs

Freed per year+180 h

Assumption: labour cost of €49.50 per hour in German manufacturing in 2025 (Destatis), plus workplace, IT and overheads.

= Value per year, before demi costs

+€11,700

gained per year

180 h ÷ 1,760 h per role = 0.1 full-time roles

An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.

Combine with more cases and get the package

Questions about this use case

What can I ask the machine?

Anything in its documents and its history: what a message means, when a part was last replaced, which parameter set applies after the last conversion, where the spare part is, who last repaired the machine. Every answer names its source.

Does demi access the machine's control system?

No. demi reads what the machine reports or exports, such as fault messages and counters, plus saved parameter sets and documents. demi writes nothing to the control system; interventions are made by the technician at the machine.

What if the manual no longer fits the conversion?

Then the agent says so. It knows conversions and retrofits from work orders, e-mails and delivery notes and shows which part of the manual still applies. If two sources contradict each other, it shows both instead of picking one.

Does this work for old machines with paper documents only?

Yes. demi reads scanned manuals, wiring diagrams and maintenance booklets too. The agent names what is missing so it can be added, and every confirmed note makes the file more complete.

See this case with your data

In the demo we show you the workflow on your own systems.

Your configurator

No use cases yet

Your configurator is still empty

Add a use case from any card or case page and see what it brings per year, with the calculation. Free, no sign-up, no commitment: try it out and change any number.

Browse use cases