Skip to content
Service & spare partsConstruction & Building ServicesCleaning & Facility Services

Every fire damper tested and documented

You see every damper with location, interval and last finding, test it by photo and voice and spot overdue dampers at once.

Today

A large building has hundreds of fire dampers in walls, floors and shafts. Each one must be released and tested regularly, per the manufacturer usually every six months, and yearly after two tests without defects. The damper list is an old spreadsheet, the plans no longer match after the third refit, and the test records are on paper. A forgotten damper only shows up when the inspector asks for it or when it stays open in a fire.

An example

Nortavo Gebäudetechnik maintains the ventilation of an office building with 412 fire dampers. The agent compares as-built drawings, the operator's damper list and two years of test records and finds 37 dampers without a single test record, nine of them in a shaft added during the 2023 refit. On the round the technician speaks the finding for each damper; on the photo of damper BSK-3.17 the agent marks a cable through the damper opening that stops it from closing. The service manager releases defect list and report, and the operator commissions the electricians the same day.
Fictional company, typical workflow.

Your data, wherever it lives

A building's dampers sit today in as-built drawings as CAD files, PDFs or scans, in a damper list in a spreadsheet, in test records on paper and in photos on the technicians' phones; dampers with actuators report to the building management system. demi reads, understands and links all of it per damper, with your rights. The AI computes every deadline, plans the round and writes the report in minutes; the technician signs the finding.

Where the data lives today

  • CAD & drawings
  • PDFs
  • Scans & paper
  • Office files
  • Photos, video & audio
  • Phone & voice
  • Machines & sensors
Data LayerOne view of everything, with your rights

How demi solves it

Three layers in this order: connect the data first, then the rights, then the AI.

  1. 1 · ConnectData Layer

    The case needs data from as-built drawings, the damper list, test records, the field service software and the building management system. demi replaces nothing and brings together per damper its ID, building, floor, room, type, release mechanism, actuator, approval, interval and every finding with photos. Dampers with actuators also get their limit switch signals from the building management system.

  2. 2 · PermitPermission Layer

    Technicians see the dampers of the buildings they look after, operators the dampers and findings of their own buildings. Only the technician who tested a damper signs its finding, and the test report and defect list reach the operator only after the service manager releases them. Every change is recorded with name and date.

  3. 3 · ActIntelligence Layer

    The agent reads plans, scanned ones too, plus old lists and records and builds the damper register from them; it shows conflicts between plan and list for clarification. It computes deadlines with fixed rules from the last test and the interval, plans rounds per floor and assigns every spoken finding and photo to the right damper. On photos it marks typical defects such as a cable through the damper opening or heavy dirt; the technician decides the finding.

How it runs

  1. 1

    demi reads as-built drawings, the damper list and earlier records and creates each damper with location, type and interval.

  2. 2

    The agent shows dampers without proof of testing, conflicts between plan and list and every deadline in the coming weeks.

  3. 3

    It plans the round per building and floor and sends it with plan and access notes to the technician's phone.

  4. 4

    The technician releases each damper, speaks the finding and takes a photo; the agent assigns both to the right damper.

  5. 5

    The service manager releases report and defect list, defects become work orders, and the operator receives the proof per damper.

What changes

  • Every damper with location, interval and last finding in one register

  • New and forgotten dampers show up when plans and lists are compared

  • Proof for operators and inspectors on demand

What does it bring you?

Check it with your own numbers

Every starting value is an assumption you can change. The calculation sits right below, step by step.

Assumption, editable

Your numbers

Result

+360 hfreed per year

Assumptions and calculation

demi keeps every damper with its deadline and findings and writes the report; you test the damper on site.

20 min → 14 min per case

How does it run today?

What is already digital saves less: the factor lowers the share demi brings.

How we calculate

300 damper tests × 20 min × 30% × 1.0 (manual) × 12 months = 21,600 min = 360 h

Value per year, before demi costs

Freed per year+360 h

Assumption: labour cost of €49.50 per hour in German manufacturing in 2025 (Destatis), plus workplace, IT and overheads.

= Value per year, before demi costs

+€23,400

gained per year

360 h ÷ 1,760 h per role = 0.2 full-time roles

An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.

Combine with more cases and get the package

Questions about this use case

Our damper list is out of date. How do we get a complete register?

The agent reads as-built drawings as CAD files, PDFs or scans, your old damper list and earlier test records and lays them over each other. Dampers that appear only in the plan or only in the list are shown for clarification. On the first round the technician confirms each damper on site; from then on the register is the shared basis.

Which interval does demi plan for testing a damper?

The rules you set: the manufacturer's instructions and the damper's approval, usually every six months and yearly after two tests without defects, plus any stricter rules of the operator. The agent computes every deadline from the last test and shows which rule applies. If a damper has a defect, the shorter interval applies again.

How does a technician on a ladder record findings?

By voice. The technician says, for example, “BSK 3.17 released, does not close, cable in the opening” and takes a photo through the access panel. The agent assigns the finding to the right damper by ID, round and location and asks back when something is unclear.

What about dampers with actuators on the building management system?

demi reads their limit switch signals and shows whether each damper closed and reopened during the test run and how long it took. Dampers without a signal or with a fault go on the list for the next round. This does not replace the visual check on site.

See this case with your data

In the demo we show you the workflow on your own systems.

Your configurator

No use cases yet

Your configurator is still empty

Add a use case from any card or case page and see what it brings per year, with the calculation. Free, no sign-up, no commitment: try it out and change any number.

Browse use cases