Skip to content
Sales & quotingElectronics & SensorsAutomotive SuppliersMedical TechnologyAerospace

Quote that includes first-article and qualification effort

The effort for first-article inspection, special processes and source inspection becomes its own quote line, estimated from past jobs.

Today

Anyone quoting a new part in aerospace, automotive or medical devices has to qualify it before series production: first-article inspection to AS9102 or PPAP, process validation, qualification of special processes such as heat treatment or penetrant testing, material certificates and often a source inspection by the customer at the plant. That can easily add up to weeks of work in quality, metrology and production, yet it rarely appears in the quote. The series part gets priced, and the margin of the first lots pays for the qualification.

An example

Rennhardt Aerospace receives an enquiry for four new Ti6Al4V brackets for a satellite structure, with a full AS9102 first-article inspection for every part number, penetrant testing and a source inspection by the customer at the plant. The agent counts 612 characteristics on the four drawings and finds three similar bracket families from recent years: there, first-article inspection took 31 hours per part number on average, and one family had to be inspected twice more after customer drawing changes. None of the three quotes showed this effort. The agent proposes 124 hours for measuring programs, measurement and forms, plus four penetrant testing technique sheets and one day of source inspection. The sales engineer lists qualification as its own line and adds to the quote that a new first-article inspection after a drawing change is charged separately.
Fictional company, typical workflow.

Your data, wherever it lives

What a qualification really costs is scattered today: booked hours and lab invoices in the ERP, first-article reports and nonconformances in the QMS, drawings in the PLM, customer quality requirements as PDFs in the mailbox, and old costings in spreadsheets. demi reads, understands and links them per part and customer, with your rights. The AI estimates the effort of a new enquiry in minutes instead of hours of searching old reports, and sales and quality decide what goes into the quote.

Where the data lives today

  • E-mails
  • PDFs
  • PLM
  • QM system
  • ERP
  • Office files
Data LayerOne view of everything, with your rights

How demi solves it

Three layers in this order: connect the data first, then the rights, then the AI.

  1. 1 · ConnectData Layer

    Data sources in this case: enquiries with drawings and customer quality requirements in the mailbox, first-article reports and nonconformances in the QMS, drawings in the PLM, hours booked on qualification jobs and lab invoices in the ERP, and old costing spreadsheets. demi replaces nothing and links every past qualification to part, customer, number of characteristics, special processes and actual effort. You see what a first-article inspection for a similar part really cost.

  2. 2 · PermitPermission Layer

    Costing, hourly rates and margins are visible only to sales and costing, inspection reports and nonconformances to quality. A customer's requirements and drawings are visible only to the team working on that enquiry. The quote goes out only after release by an authorised person; the release is recorded.

  3. 3 · ActIntelligence Layer

    The agent reads the customer's quality requirements and lists every qualification task they trigger. It counts the characteristics on the drawing and finds past parts with a similar inspection scope. Hours and costs come from booked times and invoices, not from estimates by the language model, which only explains how the references differ.

How it runs

  1. 1

    The enquiry arrives with drawings, specification and the customer's quality requirements.

  2. 2

    The agent lists the qualification required: first-article inspection, special processes, material certificates, source inspection.

  3. 3

    It counts the characteristics and finds past parts with a similar inspection scope and the effort booked on them.

  4. 4

    A separate quote line for qualification follows, every line with its reference.

  5. 5

    Sales and quality check it, set the price and release the quote.

What changes

  • Qualification gets paid instead of eating the margin of the first lots

  • Quotes state clearly what first-article and source inspection cost

  • Clear rules for repeat first-article inspections after drawing changes

What does it bring you?

Check it with your own numbers

Every starting value is an assumption you can change. The calculation sits right below, step by step.

Assumption, editable

Your numbers

Result

+108 hfreed per year

Assumptions and calculation

demi counts the characteristics and takes the effort from past qualifications; you check and set the price.

2.5 h → 1.75 h per case

How does it run today?

What is already digital saves less: the factor lowers the share demi brings.

How we calculate

12 quotes with qualification × 2.5 h × 30% × 1.0 (manual) × 12 months = 108 h

Value per year, before demi costs

Freed per year+108 h

Assumption: labour cost of €49.50 per hour in German manufacturing in 2025 (Destatis), plus workplace, IT and overheads.

= Value per year, before demi costs

+€7,020

gained per year

108 h ÷ 1,760 h per role = 0.1 full-time roles

An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.

Combine with more cases and get the package

Questions about this use case

Which qualification tasks does demi find in an enquiry?

Everything the customer's requirements trigger: first-article inspection to AS9102 or PPAP with its submission level, special processes, material and test certificates, process validation, source inspections. For this the agent reads the enquiry, drawing, specification and the customer's quality clauses. Each task shows the passage it comes from.

Where do the first-article hours come from?

From the times booked on past qualifications in the ERP and from the inspection reports in the QMS. The agent calculates per characteristic and special process and shows the reference parts. If booked times are missing, it says so instead of inventing a value.

What about repeat inspections after drawing changes?

The agent shows how often first-article inspections were repeated after a change, on similar parts and with this customer. From that you can write a rule into the quote, for example that a new inspection is charged separately. Whether and how, you decide.

Who decides the price of the qualification?

Sales and costing. The agent proposes hours and costs with their origin, and quality checks the scope. The quote goes out only after release by an authorised person.

See this case with your data

In the demo we show you the workflow on your own systems.

Your configurator

No use cases yet

Your configurator is still empty

Add a use case from any card or case page and see what it brings per year, with the calculation. Free, no sign-up, no commitment: try it out and change any number.

Browse use cases