Today
In operator self-inspection, the operator measures with a micrometer and gauges and writes the values on a sheet, often only at the end of the lot, from memory or barely legibly. A value out of tolerance or a dimension slowly drifting away only shows up at final inspection. By then the whole lot is affected.
An example
At Rabenhammer Präzisionsteile, an operator turns shafts W Ø 40 h6 in 42CrMo4 and checks every tenth part. He calls the values into his headset: “Part 120, bearing seat 39.994, length 212.05.” demi enters them in the job's inspection plan and checks them against the tolerance of 39.984 to 40.000 mm. After four checks demi reports: the bearing seat grows by about 2 µm per check and will reach the upper limit in about 30 parts. The operator compensates for tool wear, the shift lead sees the alert and the correction in the log, and no part goes to scrap.
Your data, wherever it lives
Inspection values arise at the machine today and end up on paper sheets, in spreadsheets at the terminal or hours later in the CAQ; inspection plans sit in the QM system, jobs and machine assignments in the MES. demi listens, understands every value and links it with job, characteristic and tolerance, with your rights. The AI checks each value the second it is spoken, and operator and shift lead decide what to do.
Where the data lives today
- Phone & voice
- Scans & paper
- Office files
- QM system
- MES
How demi solves it
Three layers in this order: connect the data first, then the rights, then the AI.
- 1 · ConnectData Layer
Data sources in this case: inspection plans in the QM or CAQ system, jobs and machine assignments in the MES, past inspection sheets on paper and in spreadsheets, and the values spoken at the workstation. demi replaces nothing and links every spoken value with job, machine, characteristic, nominal value and tolerance. Confirmed values go into the CAQ with inspector and time.
- 2 · PermitPermission Layer
The operator sees the inspection plan of their job, the shift lead all inspections of their line, quality everything. demi writes only confirmed values into the CAQ; holds and concessions are decided by an authorized person, and everything is recorded.
- 3 · ActIntelligence Layer
The agent understands characteristic, number and unit via headset or tablet, even with shop-floor noise in the background, and repeats every value before it counts. demi computes the tolerance check and trends, such as a value steadily heading for a limit, from the readings, not by estimate. On an outlier or a trend the agent alerts the operator and the shift lead at once.
How it runs
- 1
The operator logs on at the machine; demi knows the job and inspection plan from the MES.
- 2
They call out the readings, characteristic by characteristic or in one sentence.
- 3
demi repeats each value, enters it and checks it against the tolerance at once.
- 4
If a value is out of tolerance or heading for a limit, the alert goes to operator and shift lead.
- 5
Quality sees every inspection immediately and decides on a hold or a concession.
What changes
Inspection values complete, legible and on time
Deviations show up at the machine, not at final inspection
Both hands stay on the part and the gauge
What does it bring you?
Check it with your own numbers
Every starting value is an assumption you can change. The calculation sits right below, step by step.
Your numbers
Result
+320 hfreed per year
Assumptions and calculation
demi records the spoken values and checks them at once; you decide on every deviation.
10 min → 6 min per case
How we calculate
400 inspection sheets × 10 min × 40% × 1.0 (manual) × 12 months = 19,200 min = 320 h
Value per year, before demi costs
Freed per year+320 h
Assumption: labor cost of $48.62 per hour in US manufacturing in June 2026 (BLS), plus workplace, IT and overhead.
= Value per year, before demi costs
+$20,800
gained per year
320 h ÷ 1,760 h per role = 0.2 full-time roles
An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.
Combine with more cases and get the packageQuestions about this use case
Does voice input work in a noisy production hall?
Yes, via a headset with noise canceling or the tablet at the machine. demi repeats every value it recognized before it counts. What it did not understand with confidence, it asks again instead of guessing.
How does demi know the inspection plan?
From your QM or CAQ system: characteristics, nominal values, tolerances and inspection frequency per part. Which job runs on which machine comes from the MES. demi always works with the released version of the inspection plan.
What happens to the voice recordings?
demi stores the value, characteristic, inspector and time. Whether and how long the recording itself is kept is up to you, for example together with your works council. Monitoring individual operators' performance is not part of this case.
Do we need a new CAQ system for this?
No. demi is the path from the gauge into the CAQ: confirmed values go where you keep them today. Inspection plans, releases and analyses stay in the CAQ.
