Skip to content
Quality, standards & compliancePumps & ValvesMachinery & Plant EngineeringConveying & IntralogisticsFood & Beverage

Food contact in machines: proof for every part

demi finds every part that touches food, checks declarations and migration reports and shows which seal or lubricant has no proof.

Today

Food and pharma customers reject a machine at acceptance because a seal, a conveyor belt or a lubricant has no food contact declaration. Which parts touch the product is clear to the designer but written nowhere in the BOM. The declarations sit with purchasing, in PDFs and mailboxes, and whether they cover fatty foods, higher temperatures or the colour you used is checked by nobody until the customer's auditor asks.

An example

Ebert & Lorenz Maschinenbau builds a special machine that portions and lids deli salads. In the BOM of 1,850 items the agent marks 64 food contact parts and finds 9 without fitting proof: the declaration for the polyurethane conveyor belt covers only aqueous foods, but the salads are fatty; three EPDM O-rings from a new supplier have no declaration at all; the blue guide strip has a declaration only for the white grade; three standard parts have no material stated; and the gearbox above the product zone is filled with a grease without H1 registration. The agent drafts the requests to the suppliers and proposes an H1 grease. Four weeks before acceptance the file is complete, and the head of quality releases the declaration.
Fictional company, typical workflow.

Your data, wherever it lives

Food contact evidence is scattered today: BOMs and materials in the PLM, contact zones only in the CAD model, suppliers and orders in the ERP, declarations and test reports as PDFs in the DMS or in the mailboxes of purchasing and engineering. demi reads, understands and links it per part, with your rights. The AI checks a BOM of thousands of items against the evidence in hours instead of weeks, and your quality team releases.

Where the data lives today

  • PLM
  • CAD & drawings
  • ERP
  • E-mails
  • PDFs
  • DMS & archive
Data LayerOne view of everything, with your rights

How demi solves it

Three layers in this order: connect the data first, then the rights, then the AI.

  1. 1 · ConnectData Layer

    The case needs data from the PLM, CAD, ERP, DMS and the mailboxes of purchasing and engineering. demi replaces nothing, marks every part in the BOM that touches food and links it to material, supplier, declaration of compliance, migration test report and the conditions of use both cover.

  2. 2 · PermitPermission Layer

    BOMs and supplier evidence are visible to engineering, purchasing and quality; the customer receives only the released declaration for its machine. Purchasing sends requests to suppliers, an authorised person in quality releases the declaration for the machine, and every release is recorded.

  3. 3 · ActIntelligence Layer

    The agent identifies food contact parts from the contact zone in the model and the attributes in the BOM and has engineering confirm the list. It reads every declaration and test report and checks exactly whether material, grade and conditions fit the machine: type of food, temperature and contact time. Where proof is missing or does not fit, it drafts the request to the supplier or proposes a part that has proof.

How it runs

  1. 1

    demi reads the BOM, model and materials of the machine and marks every part with food contact.

  2. 2

    Engineering confirms the list of food contact parts.

  3. 3

    For each part the agent finds the declaration and test report and checks whether they cover the customer's food, temperature and contact time.

  4. 4

    If proof is missing, it drafts the request to the supplier or proposes a part that has proof.

  5. 5

    Quality releases the declaration for the machine before it goes to the customer's acceptance.

What changes

  • Missing declarations show up before acceptance

  • Gaps in the evidence visible while the machine is still being designed

  • A complete food contact file for every machine

What does it bring you?

Check it with your own numbers

Every starting value is an assumption you can change. The calculation sits right below, step by step.

Assumption, editable

Your numbers

Result

+216 hfreed per year

Assumptions and calculation

demi marks the food contact parts and checks every piece of proof against the application; quality releases.

15 h → 10.5 h per case

How does it run today?

What is already digital saves less: the factor lowers the share demi brings.

How we calculate

4 machines with food contact × 15 h × 30% × 1.0 (manual) × 12 months = 216 h

Value per year, before demi costs

Freed per year+216 h

Assumption: labour cost of €49.50 per hour in German manufacturing in 2025 (Destatis), plus workplace, IT and overheads.

= Value per year, before demi costs

+€14,040

gained per year

216 h ÷ 1,760 h per role = 0.1 full-time roles

An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.

Combine with more cases and get the package

Questions about this use case

Which rules does demi check?

Those that apply to your machines and markets: in the EU the framework regulation on food contact materials and the regulation on plastics, plus national recommendations for rubber and silicone, rules for metals and for lubricants with possible food contact; for the US the FDA requirements. Your quality team sets once which rules count per customer and country.

How does demi know which parts touch food?

From the contact zone in the 3D model and from attributes in the BOM, such as assemblies in the product area. The agent proposes the list; engineering confirms or completes it. The splash zone and parts above open product, such as a gearbox above the belt, are marked separately.

What if a supplier's declaration does not fit the application?

Then the agent shows why, for example a declaration for aqueous foods only, a temperature that is too low or a different colour of the material. It drafts the request to the supplier with the exact conditions of use and, where possible, names an alternative part with fitting proof.

Does the customer see our supplier documents?

Only what you release. The standard is the declaration for the machine with the list of food contact parts and their materials. You release individual supplier evidence when needed, for example for a customer audit, and every hand-over is recorded.

See this case with your data

In the demo we show you the workflow on your own systems.

Your configurator

No use cases yet

Your configurator is still empty

Add a use case from any card or case page and see what it brings per year, with the calculation. Free, no sign-up, no commitment: try it out and change any number.

Browse use cases