Skip to content
Product data & engineeringPumps & ValvesMachinery & Plant EngineeringMetal & MachiningTool & Mold Making+4

Check the drawing before release

demi checks drawing and BOM as the first checker against the 3D model, the change status and your design guideline.

Today

Every drawing should get a second pair of eyes before release, but the checks queue up with two experienced engineers. Under time pressure a wrong revision in the title block, a missing material callout, a forgotten dimension or a screw missing from the BOM slips through. The errors are then found by the supplier, in incoming inspection or in assembly, when the parts are already made.

An example

At Valbrecht the drawing of the new battery-compartment housing for the VZ-248 infusion pump is about to go to release. demi reports four findings: the title block says revision B, while the PLM already shows revision C after the last change. The general tolerance to ISO 2768 is meant for machined parts; for moulded parts the in-house guideline requires DIN ISO 20457. The depth of the battery well is in the model but dimensioned in no view, and the BOM lacks the four screws of the battery cover that every similar assembly has. The engineer corrects, then the drawing goes to the second checker.
Fictional company, typical workflow.

Your data, wherever it lives

Today the basis for a check is scattered: 3D models and drawings in the CAD system, revisions, changes and BOMs in the PLM, the design guideline and standards as PDFs in the DMS, the checklist as a spreadsheet. demi reads and understands all of it and links it per drawing, with your access rights. The AI then checks every sheet in minutes against model, change and rules, and your checker decides on release.

Where the data lives today

  • CAD & drawings
  • PLM
  • PDFs
  • DMS & archive
  • Office files
Data LayerOne view of everything, with your rights

How demi solves it

Three layers in this order: connect the data first, then the rights, then the AI.

  1. 1 · ConnectData Layer

    Data sources in this case: CAD, PLM, drawing PDFs, the DMS and your checklists. demi replaces nothing and links each drawing to its 3D model, the change status in the PLM, the bill of materials and your design guideline. So next to every callout on the sheet sits what the model, the change and the rule say about it.

  2. 2 · PermitPermission Layer

    Engineers see the findings on their own drawings; the head of engineering and quality see all of them. Only the authorized checker can release in the PLM, never the agent; every finding and every release is recorded.

  3. 3 · ActIntelligence Layer

    The agent acts as the first checker: title block, revision, material, general tolerances, surface callouts and every dimension against the 3D model. It compares the BOM with similar assemblies and finds missing screws and nuts, wrong units, odd quantities, unreleased parts and weights that do not match the model. Every finding shows its place on the sheet and the rule it breaks.

How it runs

  1. 1

    The engineer sets the drawing and BOM to review in the PLM.

  2. 2

    The agent reads sheet, title block and BOM and pulls in the 3D model and change status.

  3. 3

    It checks revision, material, tolerances and every dimension against model and design guideline.

  4. 4

    It compares the BOM with similar assemblies: missing parts, units, quantities, release status.

  5. 5

    The engineer corrects, and the second checker sees only the open points and releases.

What changes

  • Errors caught before release, not at the supplier

  • Senior checkers see only what really matters

  • Every release traceable with its check report

What does it bring you?

Check it with your own numbers

Every starting value is an assumption you can change. The calculation sits right below, step by step.

Assumption, editable

Your numbers

Result

+216 hfreed per year

Assumptions and calculation

demi checks drawing and BOM as first checker against model and rules; you release.

30 min → 21 min per case

How does it run today?

What is already digital saves less: the factor lowers the share demi brings.

How we calculate

120 drawings × 30 min × 30% × 1.0 (manual) × 12 months = 12,960 min = 216 h

Value per year, before demi costs

Freed per year+216 h

Assumption: labor cost of $48.62 per hour in US manufacturing in June 2026 (BLS), plus workplace, IT and overhead.

= Value per year, before demi costs

+$14,040

gained per year

216 h ÷ 1,760 h per role = 0.1 full-time roles

An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.

Combine with more cases and get the package

Questions about this use case

What does the agent check on a drawing?

What you define in your checklist: title block and revision, material and heat treatment, general tolerances, surface and edge callouts, missing or duplicate dimensions against the 3D model. Plus the rules of your design guideline. Add a new rule to the checklist and the agent checks it from then on.

How does demi find a missing dimension?

The agent compares the geometry of the 3D model with the dimensions on the sheet. A feature that exists in the model but is neither dimensioned nor covered by the general tolerance appears as a finding, with view and position. Duplicate dimensions are reported the same way.

Does demi check the bill of materials too?

Yes. The agent compares the new BOM with similar assemblies and reports missing standard parts such as screws and nuts, wrong units of measure, odd quantities, unreleased parts and weights that do not match the model. Each finding names the assemblies it was compared with.

Does the agent release drawings?

No. It is the first checker, not the last. Release stays with the authorized checker in the PLM, who accepts each finding or rejects it with a reason. Both are recorded, and findings that are often rejected show you which rule needs sharpening.

See this case with your data

In the demo we show you the workflow on your own systems.

Your configurator

No use cases yet

Your configurator is still empty

Add a use case from any card or case page and see what it brings per year, with the calculation. Free, no sign-up, no commitment: try it out and change any number.

Browse use cases