Today
When a pump, gearbox or spindle is stripped down, the fitter writes measurements and damage on paper with oily hands. Later someone types up the report and hunts for photos on the company phone, nominal sizes in the drawing and prices in the ERP. The customer waits days for the repair quote while his plant stands or runs on the standby pump.
An example
At Hartwig & Brunn Pumpenwerk a KP DN 100 centrifugal pump from a cooling water circuit comes in for repair, designed for 120 m³/h at 80 m head. While stripping it, the fitter dictates: heat cracks on the mechanical seal faces, cavitation damage on the impeller vane inlet edges, wear ring clearance 0.9 mm. The agent compares with drawing and service manual, nominal 0.35 mm and limit 0.7 mm, and finds the customer's note in the ticket that since a plant extension the pump delivers about 150 m³/h. It proposes cavitation from running well right of the design point as the cause, drafts the quote with impeller, wear rings, seal and bearings, and tells sales that the next pump size fits 150 m³/h. The workshop foreman confirms, and the quote goes out after three hours instead of three days.
Your data, wherever it lives
What a repair needs sits in many places today: findings on paper and photos on company phones, nominal sizes in drawings and bills of materials in the PLM, wear limits in service manuals as PDFs, the history in the ticket system, parts and prices in the ERP. demi reads, understands and links all of it per unit and serial number, with your rights. AI writes the findings from photo and dictation and drafts the quote in minutes; your workshop foreman and the customer decide what gets repaired.
Where the data lives today
- Photos, video & audio
- Scans & paper
- PLM
- CAD & drawings
- PDFs
- Tickets
- ERP
How demi solves it
Three layers in this order: connect the data first, then the rights, then the AI.
- 1 · ConnectData Layer
Data sources in this case: photos and voice notes from the workshop, ERP, PLM with drawings, service manuals as PDFs and the ticket system. demi replaces nothing and links every finding to the unit's serial number, its bill of materials, the nominal sizes from the drawing, the wear limits from the manual, earlier repairs of the same unit and spare parts with price and lead time.
- 2 · PermitPermission Layer
Fitters dictate and see the drawings and limits of their job; prices and costing are visible only to the service office. Findings and quote reach the customer only after the workshop foreman has released the report and the service office the quote; both releases are recorded.
- 3 · ActIntelligence Layer
The agent turns dictation and photos into findings per component, checks every measurement against nominal size and wear limit and proposes a likely cause of damage, backed by damage pattern, measurements and the details in the ticket. From this it drafts repair scope, parts list and quote. The workshop foreman confirms or changes the cause.
How it runs
- 1
The pump arrives in the workshop; demi opens the job with serial number, bill of materials and history.
- 2
While stripping it, the fitter photographs each component and dictates findings and measurements without taking off his gloves.
- 3
The agent writes the findings, checks each value against nominal size and wear limit and proposes a cause.
- 4
Repair scope, a parts list with lead times and a draft quote follow.
- 5
Foreman and service office check and release; the customer gets findings and quote the same day.
What changes
Repair quote on the day of the teardown, not days later
Uniform findings backed by photos and measurements
Recurring causes of damage reach engineering and sales
What does it bring you?
Check it with your own numbers
Every starting value is an assumption you can change. The calculation sits right below, step by step.
Your numbers
Result
+288 hfreed per year
Assumptions and calculation
demi writes report and draft quote from photos and dictation; the foreman and office check and release.
90 min → 54 min per case
How we calculate
40 teardown reports × 90 min × 40% × 1.0 (manual) × 12 months = 17,280 min = 288 h
Value per year, before demi costs
Freed per year+288 h
Assumption: labor cost of $48.62 per hour in US manufacturing in June 2026 (BLS), plus workplace, IT and overhead.
= Value per year, before demi costs
+$18,720
gained per year
288 h ÷ 1,760 h per role = 0.2 full-time roles
An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.
Combine with more cases and get the packageQuestions about this use case
Does the fitter have to sit at a computer?
No. He takes photos and speaks right at the workbench, with a phone or tablet in a holder, in his own language if he prefers. demi recognizes components, measurements and units in the dictation and asks when a required value such as a clearance is missing.
Where does the agent get nominal sizes and wear limits?
From your documents: drawings and bills of materials in the PLM, service manuals and test instructions, earlier findings on the same type. Every comparison names the drawing or manual page the limit comes from. If a limit is missing, the agent shows the measurement without a rating and says so.
How reliable is the proposed cause of damage?
It is a reasoned proposal, not a verdict. The agent names the damage pattern, the measurements, the customer's details and similar earlier cases it rests on. The workshop foreman decides which cause goes into the report.
What happens to the findings after the repair?
They stay linked to type, customer and operating conditions. Engineering sees which components wear under which conditions, and sales sees which customers run their pumps outside the design range and need a different size.
