Today
Whether a site falls under the Seveso rules, and in which tier, depends on the dangerous substances on site: quantities per hazard category and named substance, combined by the summation rule. This is usually calculated once a year in a large spreadsheet from safety data sheets and a stock extract. In between, stock, raw materials and classifications change, and a seasonal peak or a revised safety data sheet can exceed the notified quantities or push the site into the upper tier without anyone noticing in time.
An example
Orvelon in Bad Dürrenberg is a lower-tier Seveso site. In mid-September the agent reports that the summation total for environmental hazards would reach 1.04 in the second half of October, above the upper-tier threshold. Three things tip the balance: 38 t of a disinfectant active ingredient that purchasing ordered in one go at a good price, 120 t of chlorinated alkaline foam cleaner for customers in the sugar beet campaign, and a new safety data sheet that moves a raw material for corrosion inhibitors from chronic category 2 to chronic category 1. The agent proposes taking the active ingredient in two part deliveries and shipping 40 t of foam cleaner straight from production to the sugar factories, which brings the peak down to 0.87. The plant manager goes ahead, and the safety officer confirms the new classification.
Your data, wherever it lives
The data for the Seveso calculation sits in many places today: stock per location in the warehouse system and the ERP, safety data sheets as PDFs in folders and supplier e-mails, the annual calculation in a spreadsheet, permit and notification in the archive. demi reads, understands and links them per substance and location, with your rights. AI computes the totals every day instead of once a year and warns before a threshold; how the site responds is decided by your plant management.
Where the data lives today
- ERP
- Databases
- PDFs
- Office files
- E-mails
- DMS & archive
How demi solves it
Three layers in this order: connect the data first, then the rights, then the AI.
- 1 · ConnectData Layer
Data sources in this case: the warehouse management system, the ERP, safety data sheets and the permit and notification documents. demi replaces nothing and links, per substance and mixture, the classification from the current safety data sheet with storage location, stock, open purchase orders, customer orders and planned production. The notified and permitted maximum quantities per site and warehouse come on top.
- 2 · PermitPermission Layer
Quantities per category and forecasts are visible to the safety officer, plant management and warehouse management; purchasing and sales see only the warnings that concern their orders. Only the safety officer changes a substance's category, and every change is logged. Notifications to the authority go out only after management releases them.
- 3 · ActIntelligence Layer
The agent reads classification and composition from every safety data sheet, maps the hazard statements to the Seveso categories and recognizes named substances such as methanol or ammonia. It computes quantities and summation rule ratios exactly from stock, for today and, with orders and the production plan, for the coming weeks. When a total approaches a threshold, it names the substances that tip the balance; unclear classifications go to the safety officer instead of being guessed.
How it runs
- 1
demi reads safety data sheets from folders, supplier e-mails and your own authoring, each substance gets its Seveso category, and the safety officer confirms unclear cases.
- 2
Stock per storage location flows in continuously from the warehouse system, plus open purchase orders, customer orders and the production plan.
- 3
The agent computes quantities and summation rule totals per category and named substance, for today and the coming weeks.
- 4
When a total approaches a threshold or a notified maximum, it warns plant and warehouse management, names the substances that tip the balance and proposes steps such as rescheduled deliveries.
- 5
Plant management decides, and if a change must be notified, the agent prepares the notification for release.
What changes
Quantities per category up to date every day, not only on the reporting date
Seasonal peaks and new classifications show up before they reach a threshold
Every quantity backed by storage location, safety data sheet and category
What does it bring you?
Check it with your own numbers
Every starting value is an assumption you can change. The calculation sits right below, step by step.
Your numbers
Result
+90 hfreed per year
Assumptions and calculation
demi classifies substances from the safety data sheet and computes the totals; you check and decide.
45 min → 27 min per case
How we calculate
25 classifications and stock checks × 45 min × 40% × 1.0 (manual) × 12 months = 5,400 min = 90 h
Value per year, before demi costs
Freed per year+90 h
Assumption: labor cost of $48.62 per hour in US manufacturing in June 2026 (BLS), plus workplace, IT and overhead.
= Value per year, before demi costs
+$5,850
gained per year
90 h ÷ 1,760 h per role = 0.1 full-time roles
An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.
Combine with more cases and get the packageQuestions about this use case
How does demi know a substance's Seveso category?
From the safety data sheet: the agent reads classification and hazard statements and maps them to the Seveso categories, for example aquatic chronic category 1 to environmental hazards. It recognizes named substances by name and CAS number. Every mapping shows its safety data sheet, and where it is ambiguous, the safety officer decides.
What happens when a supplier changes its safety data sheet?
The agent compares the new version with the old one and reports a changed classification at once, with its effect on the totals for today and for planned stock. Until the safety officer confirms the new category, it calculates with the stricter of the two.
Is this only for chemical companies?
No. Hazardous goods warehouses in logistics, waste companies handling hazardous waste and food plants with large ammonia refrigeration systems apply the same rule. For warehouses with changing customer goods, the daily view matters even more, because the mix changes every week.
Does demi replace the safety officer or the safety report?
No. demi keeps quantities up to date and computes the totals in a traceable way; the assessment stays with the safety officer and plant management. For notifications, the safety report and questions from the authority, the agent compiles the figures with evidence, and management releases them.
