Skip to content
Service & spare partsPumps & ValvesWater & EnvironmentMachinery & Plant EngineeringChemicals & Process Industry+2

Service reports that pass the customer's audit

Before a report goes to a pharma or food customer, demi checks calibrations, training records, part certificates and signatures.

Today

For customers in pharma, food and medical devices, your service report becomes part of their GMP documentation. If the torque wrench's calibration certificate is missing, a signature is illegible or a spare part differs from the qualified one, it becomes a finding in the customer's next audit, with your name on it. Today nobody checks this systematically before the report goes out: calibration certificates sit in test equipment management, training records in HR, part certificates in goods receipt.

An example

Hartwig & Brunn Pumpenwerk replaces the mechanical seal of a DN 100 centrifugal pump in 1.4408 in a pharma customer's purified water loop. Before the report goes out, demi finds three gaps: the torque wrench DS-114, which the technician had taken at short notice instead of their own, had been out of calibration for nine days; the conformity certificate for the new elastomers is missing; and the seal is a successor version that differs from the qualified part. Service management has DS-114 calibrated at once; it is within tolerance, and the result is attached to the report together with the certificate and a note recommending change control to the customer. At the supplier audit two months later, the auditor picks exactly this report, and all the proof is attached.
Fictional company, typical workflow.

Your data, wherever it lives

What a service report needs for a GMP audit is spread across many places today: the report in the service app or as a signed scan, calibration certificates as PDFs in test equipment management, training records in the HR system, part certificates in goods receipt and the customer's requirements in contracts and e-mails. demi reads, understands and links them per report, with your permissions. The AI checks every report in minutes instead of after a long search, and your service management releases it.

Where the data lives today

  • Tickets
  • QM system
  • HR system
  • PDFs
  • Scans & paper
  • ERP
  • E-mails
Data LayerOne view of everything, with your rights

How demi solves it

Three layers in this order: connect the data first, then the rights, then the AI.

  1. 1 · ConnectData Layer

    The case needs data from service planning, test equipment management, the quality system, the HR system and the ERP. demi replaces nothing and links every report to the test equipment used and its calibration certificates, the technician's training records, the certificates of the parts fitted and the customer's requirements from the quality agreement and service contract.

  2. 2 · PermitPermission Layer

    Training and personnel data is visible only to those who need it for the check; the customer receives only the proof that belongs to their report, such as a copy of the calibration certificate, never the personnel file. The technician signs the report, service management releases it, and every correction stays visible with name, date and reason.

  3. 3 · ActIntelligence Layer

    The agent reads every report, including scanned paper reports, recognizes test equipment by inventory number and fitted parts by item number and checks point by point against the customer's requirements. It calculates validity from the dates on calibration certificates and training records, not from the text. Whatever is missing or deviates is shown with its reason; service management decides whether to rework.

How it runs

  1. 1

    Before the job, demi checks the customer's requirements and whether the planned technician's test equipment and training are valid.

  2. 2

    The technician writes the report as usual, with readings, parts, photos and signatures.

  3. 3

    demi checks every report against calibration certificates, training records, part certificates and the customer's requirements.

  4. 4

    The agent flags gaps and deviations with reasons, such as an expired calibration certificate or a spare part that differs from the qualified one.

  5. 5

    Service management releases the complete report with all proof, and it goes to the customer.

What changes

  • Every report complete before it reaches the customer

  • Fewer findings in customer audits, less rework on reports

  • Expired calibrations and training show up before the job

What does it bring you?

Check it with your own numbers

Every starting value is an assumption you can change. The calculation sits right below, step by step.

Assumption, editable

Your numbers

Result

+192 hfreed per year

Assumptions and calculation

demi checks each report against calibrations, training and customer rules; service management releases it.

30 min → 18 min per case

How does it run today?

What is already digital saves less: the factor lowers the share demi brings.

How we calculate

80 service reports for GMP customers × 30 min × 40% × 1.0 (manual) × 12 months = 11,520 min = 192 h

Value per year, before demi costs

Freed per year+192 h

Assumption: labor cost of $48.62 per hour in US manufacturing in June 2026 (BLS), plus workplace, IT and overhead.

= Value per year, before demi costs

+$12,480

gained per year

192 h ÷ 1,760 h per role = 0.1 full-time roles

An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.

Combine with more cases and get the package

Questions about this use case

How does demi know what our pharma and food customers require?

From your contracts, quality agreements and the requirements customers send you, such as forms, deadlines for the report or mandatory details. demi turns them into a checklist per customer that you approve. When a customer changes its requirements, the agent shows which points are new.

Does demi also check signed paper reports?

Yes. The agent reads scanned reports, recognizes fields, signatures and corrections and flags empty mandatory fields or overwritten values. It does not verify whether a signature is genuine; it shows whether it is where it must be.

What if a test instrument was out of calibration on the day of the job?

demi flags the report and shows which readings were taken with that instrument. Your service management decides what follows, for example a calibration with proof or a new measurement. To stop it happening again, demi warns before every job when a calibration is about to expire.

Does the customer see our training records?

Only what you release for their report, such as proof that the technician is trained for their equipment. Personnel files and other customers stay invisible.

See this case with your data

In the demo we show you the workflow on your own systems.

Your configurator

No use cases yet

Your configurator is still empty

Add a use case from any card or case page and see what it brings per year, with the calculation. Free, no sign-up, no commitment: try it out and change any number.

Browse use cases