Skip to content
Sales & quotingConstruction & Building ServicesMining & Raw MaterialsWaste & Recycling

Aggregate quote with freight and declaration of performance

The AI reads site, grading and quantity from the inquiry, prices material and haulage by route and attaches the declaration of performance.

Today

Every site inquiry is priced on the phone with a freight-zone table and a calculator. How far the site really is on roads fit for trucks, and which declaration of performance matches grade and required standard, someone works out from scratch every time. By the time the quote is ready, the contractor has often ordered from the next quarry.

An example

At Montanis Hartsteinwerke, a road builder sends an e-mail inquiry for 2,400 t of 0/32 crushed stone base course to TL SoB-StB 20 for a municipal road, laying from May 12, site 38 km away. The agent routes via the main road, because the shorter route crosses a bridge rated for only 7.5 t, and with 25 t payload per load from the weighbridge data arrives at 96 loads over four laying days. Ex-works price, haulage per tonne and tolls appear separately in the draft, together with the declaration of performance for 0/32 to DIN EN 13242. The salesperson grants a volume discount on the ex-works price and sends the quote after 20 minutes.
Fictional company, typical workflow.

Your data, wherever it lives

Inquiries arrive today by e-mail, as a bill of quantities in a PDF or as a note from a phone call; prices sit in the ERP, haulage rates in spreadsheets, declarations of performance in document storage and weighing data at the weighbridge. demi reads, understands and links them with map data, with your rights. The AI prices material and haulage on the real route within minutes, and your sales team decides on the price.

Where the data lives today

  • E-mails
  • PDFs
  • ERP
  • Office files
  • DMS & archive
  • Web & portals
Data LayerOne view of everything, with your rights

How demi solves it

Three layers in this order: connect the data first, then the rights, then the AI.

  1. 1 · ConnectData Layer

    Data sources in this case: inquiries by e-mail, the ERP, haulage rates in spreadsheets, declarations of performance and test reports in document storage, map data and weighbridge data. demi replaces nothing and links every inquiry to customer and price list, grades and stockpile levels, earlier loads to the same area and the valid declaration of performance for each grade. Haulage is priced on real routes, not as the crow flies.

  2. 2 · PermitPermission Layer

    Ex-works prices, haulage rates and customer discounts are visible only to sales and dispatch. Sales management approves quotes above a set quantity or with special prices. Declarations of performance go to the customer only in their valid, approved version, and every approval is recorded.

  3. 3 · ActIntelligence Layer

    The agent reads site, grade, grading, quantity and date from the inquiry, even from a bill of quantities, and matches them to your grades. It calculates route, driving time, tolls and number of loads by fixed rules from map data, your haulage rates and the payload from your weighbridge data. If no grade meets the required standard or the access is unclear, it says so before calculating.

How it runs

  1. 1

    The inquiry arrives by e-mail, as a bill of quantities or as a note from a phone call.

  2. 2

    The agent reads site, grade, grading, quantity and date and matches the grade to your range.

  3. 3

    From map data it calculates route, driving time and tolls, from your weighbridge data the payload per load.

  4. 4

    Ex-works price, haulage per tonne and the valid declaration of performance go into the draft quote.

  5. 5

    Sales checks it, adjusts the price and sends the quote.

What changes

  • Quotes arrive while the contractor is still comparing

  • Haulage priced on real routes instead of freight zones

  • The right declaration of performance comes with every quote

What does it bring you?

Check it with your own numbers

Every starting value is an assumption you can change. The calculation sits right below, step by step.

Assumption, editable

Your numbers

Result

+240 hfreed per year

Assumptions and calculation

demi reads the inquiry, prices material and haulage and attaches the declaration; you check it.

25 min → 15 min per case

How does it run today?

What is already digital saves less: the factor lowers the share demi brings.

How we calculate

120 site inquiries × 25 min × 40% × 1.0 (manual) × 12 months = 14,400 min = 240 h

Value per year, before demi costs

Freed per year+240 h

Assumption: labor cost of $48.62 per hour in US manufacturing in June 2026 (BLS), plus workplace, IT and overhead.

= Value per year, before demi costs

+$15,600

gained per year

240 h ÷ 1,760 h per role = 0.1 full-time roles

An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.

Combine with more cases and get the package

Questions about this use case

How does demi calculate haulage to the site?

With your haulage rates, for example per tonne and kilometre or per hour and vehicle, on the real truck route with closures, weight limits and toll roads. The payload per load comes from your weighbridge data. Every value in the quote shows where it comes from.

Which declaration of performance does demi attach?

The valid version for exactly the grade being quoted, matching the standard in the inquiry, such as DIN EN 13242 for base course or DIN EN 13450 for railway ballast. If none of your grades meets the required standard, demi says so instead of attaching the wrong declaration.

What if the inquiry gives no exact address?

Then the agent locates the site by road, plot or coordinates from the bill of quantities and shows it on the map. If access is unclear, it proposes a question to the customer, and your sales team confirms the unloading point.

Does demi check whether there is enough material in stock?

Yes. demi compares the requested quantity with stockpile levels and quantities already promised in the ERP. If stock will not last until the laying date, demi shows this in the draft and proposes split deliveries or an equivalent grade; your sales team decides.

See this case with your data

In the demo we show you the workflow on your own systems.

Your configurator

No use cases yet

Your configurator is still empty

Add a use case from any card or case page and see what it brings per year, with the calculation. Free, no sign-up, no commitment: try it out and change any number.

Browse use cases