Skip to content
Management & reportingMachinery & Plant EngineeringMetal & MachiningPlastics & PackagingMining & Raw Materials+4

Old machine: retrofit or replace?

demi sets failures, spare part risk, energy and quotes side by side and calculates retrofit and replacement over the full service life.

Today

Old machines are kept alive until a breakdown forces a decision under time pressure. What the machine really costs is spread across repair orders, spare part purchases, downtime and the power bill, and nobody adds it up. The retrofit quote and the new machine are then compared on gut feeling and purchase price.

An example

Edge bander KAM 2 at Tannried Möbelwerk is 18 years old, and its control system has been discontinued. The agent shows that its downtime rose from 31 hours in 2023 to 84 hours in 2025; in 2026 a control fault stopped it for nine days because the circuit board was only available from a used-parts dealer. Over ten years, the retrofit at 148,000 euros comes out about 190,000 euros cheaper than the new machine at 465,000 euros, but only the new machine can do zero-joint edges. Management orders the retrofit and asks sales to check how often zero-joint edges are requested for HPL table tops.
Fictional company, typical workflow.

Your data, wherever it lives

What an old machine really costs is spread today across fault reports and repair orders in maintenance, spare part purchases and asset values in the ERP, meter data, quotes as PDFs and discontinuation notices in e-mails. demi reads, understands and links them per machine, with your rights. The AI calculates retrofit and replacement over the full service life in hours instead of weeks, and management decides.

Where the data lives today

  • Tickets
  • ERP
  • Machines & sensors
  • PDFs
  • E-mails
Data LayerOne view of everything, with your rights

How demi solves it

Three layers in this order: connect the data first, then the rights, then the AI.

  1. 1 · ConnectData Layer

    Data sources in this case: maintenance, the ERP, meters and machine data, quotes as PDFs and manufacturer letters in e-mails. demi replaces nothing and links, per machine, failures, repair hours, spare part purchases, asset value, running hours and energy use with the quotes for a retrofit and a new machine. Discontinuation notices for controls, drives or spare parts sit directly on the machine.

  2. 2 · PermitPermission Layer

    Quotes, prices and asset values are visible to management, controlling, purchasing and plant management. Maintenance and production see the technical comparison. Deciding and ordering stay with the people authorized to do so; the proposal and all its assumptions are recorded.

  3. 3 · ActIntelligence Layer

    The agent derives the failure trend from the fault history, rates spare part risk from discontinuations, stock and lead times and compares both quotes line by line, including what is missing, such as safety technology, training or documentation. It calculates both paths over the service life with your assumptions, deterministically and traceably; the language model only writes the decision paper. If a retrofit changes protective functions or performance, it flags the question of a substantial modification for review.

How it runs

  1. 1

    You choose the machine, and demi gathers its faults, repairs, spare parts, running hours and energy data.

  2. 2

    The agent shows the failure trend and which parts are discontinued or have long lead times.

  3. 3

    The retrofit quote and the new machine are compared line by line, with gaps in scope flagged.

  4. 4

    The agent calculates both paths over the service life, with downtime cost, energy, maintenance and your assumptions.

  5. 5

    Management receives a decision paper, every figure with its source, and decides.

What changes

  • Investment decisions before the breakdown, not after it

  • Retrofit and replacement on the same calculation basis

  • Spare part risks visible across the whole machine park

What does it bring you?

Check it with your own numbers

Every starting value is an assumption you can change. The calculation sits right below, step by step.

Assumption, editable

Your numbers

Result

+115 hfreed per year

Assumptions and calculation

demi gathers failures, spare parts, energy and quotes and calculates both paths; you decide.

16 h → 11.2 h per case

How does it run today?

What is already digital saves less: the factor lowers the share demi brings.

How we calculate

2 investment proposals × 16 h × 30% × 1.0 (manual) × 12 months = 115 h

Value per year, before demi costs

Freed per year+115 h

Assumption: labor cost of $48.62 per hour in US manufacturing in June 2026 (BLS), plus workplace, IT and overhead.

= Value per year, before demi costs

+$7,475

gained per year

115 h ÷ 1,760 h per role = 0.1 full-time roles

An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.

Combine with more cases and get the package

Questions about this use case

What assumptions does demi use to compare retrofit and replacement?

Yours: service life, interest rate, cost of one hour of downtime, energy price and expected utilization. Every assumption is shown openly in the paper and can be changed, and the calculation reruns at once. Every figure points to the order, invoice, meter or quote line it comes from.

Does demi notice when spare parts or controls are discontinued?

Yes, if the information is somewhere in your company: discontinuation letters in e-mails or PDFs, supplier lists and purchase history. The agent matches them with the machine's parts list and stock and shows which parts are critical and how long the last repair without a new part took.

Does the machine need a new CE marking after a retrofit?

It may. If the conversion is a substantial modification, whoever is responsible for it, your company or the retrofitter, legally counts as the manufacturer, and the machine needs a new conformity assessment. The agent flags the quote lines that change protective functions or performance for review; your machine safety experts make the assessment.

Can demi assess the whole machine park at once?

Yes. The agent ranks every machine by failure trend, spare part risk and importance for production and shows where a decision falls due in the coming years. That way you can plan the investment budget before the next machine breaks down.

See this case with your data

In the demo we show you the workflow on your own systems.

Your configurator

No use cases yet

Your configurator is still empty

Add a use case from any card or case page and see what it brings per year, with the calculation. Free, no sign-up, no commitment: try it out and change any number.

Browse use cases