Skip to content
Service & spare partsPumps & ValvesWater & EnvironmentMining & Raw MaterialsEnergy & Utilities+2

Pumps that quietly waste energy

demi lays head, flow and power of every pump over its curve, finds the energy wasters and works out what a replacement saves.

Today

Many pumps run for decades at an operating point they were never designed for: oversized, throttled by a half-closed valve, with a worn impeller. The curve sits in the data sheet, pressure, flow and current in the control system, but nobody lays one over the other. So the plant pays every year for energy lost in valves and as heat, and nobody can say which pump pays off first.

An example

At Aldevo Wassertechnik, the agent lays remote service data from 64 pumps in 18 serviced waterworks over the curves from their data sheets. Eleven pumps run permanently far to the left of their best efficiency point. At the top is a 45 kW raw water pump: on average it delivers 120 instead of the 200 m³/h of its best point, throttled by a valve, and uses around 83,000 kWh a year more than necessary. With a smaller impeller and a variable speed drive, the retrofit pays back in about eighteen months. The service manager checks the calculation and releases the quote to the waterworks.
Fictional company, typical workflow.

Your data, wherever it lives

How your pumps run is spread out today: pressure, flow and running hours in control system exports, consumption at energy meters and in spreadsheets, pump curves in PDF data sheets, repairs and impeller changes in the maintenance tickets. demi reads, understands and links them per pump, with your rights. The AI finds the pumps running far from their best point in minutes and works out the saving, and your maintenance team decides on the replacement.

Where the data lives today

  • Machines & sensors
  • Office files
  • PDFs
  • Tickets
Data LayerOne view of everything, with your rights

How demi solves it

Three layers in this order: connect the data first, then the rights, then the AI.

  1. 1 · ConnectData Layer

    Data sources in this case: exports from the control system with pressure, flow and running hours, energy meters, data sheets and pump curves as PDF, the maintenance history from the maintenance system. demi replaces nothing and links every pump, via measuring point and nameplate, to its curve, its running hours and its repairs. For every pump you see where it actually runs and where its best efficiency point lies.

  2. 2 · PermitPermission Layer

    Maintenance, energy management and plant management see operating data and results; curves from manufacturer documents stay with the roles allowed to use them. A replacement or retrofit is ordered only once the responsible manager has checked and approved the calculation; every approval is recorded.

  3. 3 · ActIntelligence Layer

    The agent calculates each pump's actual operating point and efficiency from pressure, flow and electrical power and compares it with the curve. For the largest gaps it works out options such as trimming the impeller, a variable speed drive or a smaller pump, with savings and payback worked out traceably from the measurements, your power price and earlier quotes. The language model only explains the result.

How it runs

  1. 1

    demi reads operating data, energy meters, data sheets and maintenance history per pump.

  2. 2

    The agent matches every measuring point to its pump and that pump's curve.

  3. 3

    It calculates operating point and efficiency and shows how far each pump runs from its best point.

  4. 4

    For the biggest energy wasters it works out options with savings, cost and payback.

  5. 5

    Maintenance or service checks the calculation and approves the retrofit or the quote.

What changes

  • Less power for the same flow

  • A ranking of which pump pays off first

  • Solid figures for investment requests and energy audits

What does it bring you?

Check it with your own numbers

Every starting value is an assumption you can change. The calculation sits right below, step by step.

Assumption, editable

Your numbers

Result

+108 hfreed per year

Assumptions and calculation

demi lays operating data over the pump curve and works out the saving; you decide on the replacement.

2 h → 1.4 h per case

How does it run today?

What is already digital saves less: the factor lowers the share demi brings.

How we calculate

15 pump assessments × 2 h × 30% × 1.0 (manual) × 12 months = 108 h

Value per year, before demi costs

Freed per year+108 h

Assumption: labor cost of $48.62 per hour in US manufacturing in June 2026 (BLS), plus workplace, IT and overhead.

= Value per year, before demi costs

+$7,020

gained per year

108 h ÷ 1,760 h per role = 0.1 full-time roles

An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.

Combine with more cases and get the package

Questions about this use case

How does demi know a pump's curve?

From the data sheet or the pump selection, stored as a PDF or in old folders; the agent reads head, efficiency and power over flow. If the data sheet is missing, it looks up the matching series by nameplate and serial number and shows which source the calculation rests on.

Do we need extra instruments on the pumps?

Usually not. Pressure before and after the pump, flow and current or power are already in the control system or at the energy meter in many plants. If a value is missing, the agent shows which measuring point would make the calculation reliable and works with the existing values until then, clearly marked.

How does demi calculate savings and payback?

From the measured operating point, the running hours and your power price: the agent compares today's consumption with that of a suitable option, such as a trimmed impeller, a variable speed drive or a smaller pump. Investment costs come from earlier quotes and orders. Every figure shows where it comes from, and you can change the assumptions.

Does this also work for pumps we service at customers?

Yes. Where you receive operating data from remote service or operator reports, the agent calculates in the same way and prepares a quote with savings and payback. It goes out only after your service team approves it, and the operator sees only the data of their own plants.

See this case with your data

In the demo we show you the workflow on your own systems.

Your configurator

No use cases yet

Your configurator is still empty

Add a use case from any card or case page and see what it brings per year, with the calculation. Free, no sign-up, no commitment: try it out and change any number.

Browse use cases