Today
A crane inquiry rarely comes with every dimension. Usually the customer sends a hall drawing as DWG or PDF, plan and section, plus one line: 10 t, hook as high as possible. Before sales can price it, a design engineer has to read span, top of rail, clearance to the roof truss, runway length and end approaches from the drawing, choose a single- or double-girder crane and check the wheel loads against the runway. The engineers are tied up in orders, the inquiry waits, and an overlooked truss later means rework on site.
An example
A steel fabricator in the Saarland sends Conveyra Fördertechnik the drawing of its new production hall as DWG and asks for an overhead crane with 10 t capacity and 7.50 m hook height. The agent reads a 22.40 m span, 96 m of runway, top of rail at 8.50 m and 1.70 m up to the underside of the roof truss. A single-girder crane would only reach 6.60 m hook height, so it configures a double-girder crane BK 10 t to EN 15011, mechanism group FEM 2m, with radio control, and prices three days of installation with a mobile crane plus the inspection before first use. It flags that the hall's structural calculation designs the runway for 75 kN wheel load while the crane comes to 82 kN. Sales clears this with the customer's structural engineer, then design engineer and sales release the quote.
Your data, wherever it lives
Today the basis for a crane quote sits in many places: the customer's hall drawing and structural calculation as DWG, PDF or scan in a mailbox, the modular system and configuration rules in the PLM, prices, installation times and earlier quotes in the ERP and in costing spreadsheets. demi reads, understands and links them per inquiry, with your access rights. The AI reads the dimensions, configures the crane and prices the installation in hours instead of days, and design engineer and sales check and decide.
Where the data lives today
- CAD & drawings
- PDFs
- Scans & paper
- E-mails
- PLM
- ERP
- Office files
How demi solves it
Three layers in this order: connect the data first, then the rights, then the AI.
- 1 · ConnectData Layer
Data sources in this case: the inquiry in the mailbox, the customer's hall drawing and structural calculation as CAD file, PDF or scan, your PLM with modular system, components and configuration rules, and the ERP with prices, installation times and earlier quotes. demi replaces nothing and links the dimensions from the drawing with the variants of your modular system and with cranes built for similar halls. Each inquiry then sits in one record with dimensions, configuration, wheel loads and installation effort.
- 2 · PermitPermission Layer
Configuration rules and design data are visible to sales and engineering; prices and costing only to sales. A customer's hall drawings and structural calculation are seen only by the team working on that inquiry. The quote goes out only after the responsible design engineer releases the configuration and sales the price; the release is recorded.
- 3 · ActIntelligence Layer
The agent reads span, top of rail, clearance to the truss, runway length and column grid from the drawing, including sections and dimensions in a scan. Hook height, wheel loads, girder profile and price are calculated by your modular system and configuration rules, not by the language model. Where a dimension is missing or does not fit, it flags it and writes the question for the customer.
How it runs
- 1
The inquiry arrives by e-mail with the hall drawing and the load capacity.
- 2
The agent reads span, top of rail, clearance to the truss, runway length and end approaches from the drawing.
- 3
It chooses single- or double-girder design, hoist and mechanism group from your modular system and calculates hook height and wheel loads.
- 4
It adds installation, the mobile crane for lifting in and the inspection before first use at your rates.
- 5
Design engineer and sales check the configuration and flagged points and release the quote.
What changes
Crane inquiries get an answer within hours
Clashes with truss, columns or runway show up before the quote
Engineers check instead of measuring drawings
What does it bring you?
Check it with your own numbers
Every starting value is an assumption you can change. The calculation sits right below, step by step.
Your numbers
Result
+270 hfreed per year
Assumptions and calculation
demi reads the hall drawing, configures the crane and prices installation; you check and release.
2.5 h → 1.75 h per case
How we calculate
30 crane inquiries × 2.5 h × 30% × 1.0 (manual) × 12 months = 270 h
Value per year, before demi costs
Freed per year+270 h
Assumption: labor cost of $48.62 per hour in US manufacturing in June 2026 (BLS), plus workplace, IT and overhead.
= Value per year, before demi costs
+$17,550
gained per year
270 h ÷ 1,760 h per role = 0.2 full-time roles
An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.
Combine with more cases and get the packageQuestions about this use case
Which drawing formats can the agent read?
CAD files such as DWG or DXF, PDF drawings and scanned or photographed drawings. From CAD files it takes dimensions directly; from scans it reads dimension lines and level marks. Every dimension in the quote shows which drawing and which view it comes from.
Does the agent also check the crane runway and the hall's structure?
It compares the wheel loads of its configuration with the values in the hall drawing or structural calculation and flags every overrun. The structural verification of the runway is still done by the customer's or your own structural engineer. If runway data is missing, it goes into the question for the customer.
Does this also work for suspension, gantry or jib cranes?
Yes, for everything your modular system and configuration rules cover. For suspension cranes the agent reads the roof structure and suspension points, for gantry cranes the outdoor areas and travel paths. Anything that does not fit the modular system is flagged as a special design for engineering.
Who decides which crane is offered?
The responsible design engineer together with sales. The agent proposes the configuration with its reasons, such as why a double-girder crane is needed, and shows alternatives with their effect on hook height and price. The quote goes out only after release.
