Today
A large part of the machine park is older than any interface. Its data sits on USB sticks, counters and slips of paper; at best someone types it up, mostly it never reaches a report. Decisions on orders, maintenance and investment therefore see only the new machines.
An example
At Rabenhammer Präzisionsteile, seven of 23 lathes run without a network connection. At the end of each shift, operators photograph the part counter and display with a tablet, and the hardening shop drops the furnace logs as CSV from a USB stick onto the network drive. The first weekly report with all machines shows that the 1991 multi-spindle lathe MS 6 reaches only 61 % of its target quantity on shafts W Ø 40 h6, and the shift sheets almost always name the bar change.
Your data, wherever it lives
The data of your old machines already exists, just scattered: exports on USB sticks and on the network drive, counter readings and displays someone photographs, handwritten shift sheets in binders, quantity lists in old spreadsheets. demi reads, understands and links them, with your rights. The old machines then stand in the same report as the new ones without anyone typing up slips, and production management decides with the whole machine park in view.
Where the data lives today
- Machines & sensors
- Photos, video & audio
- Scans & paper
- NAS & hard disks
- Office files
- Legacy systems
How demi solves it
Three layers in this order: connect the data first, then the rights, then the AI.
- 1 · ConnectData Layer
Data sources in this case: the machines, network drive, photos, scans, old spreadsheets and legacy systems. demi replaces nothing and reads exports and logs in their old formats, counter readings and display values from photos and handwriting from shift sheets. Every value is tied to machine, shift and order, just like the machines in the MES.
- 2 · PermitPermission Layer
Machine data is visible to production, maintenance and plant management. On photos only the value counts: demi does not evaluate who stood at the machine. Values go into the MES only after approval, and every correction is recorded.
- 3 · ActIntelligence Layer
The agent recognizes which machine a file or photo comes from, reads the values and converts counter readings into quantities per shift. It checks them for plausibility, for example against the cycle time, and marks what it cannot read with certainty instead of guessing; every value keeps its source.
How it runs
- 1
You define what each old machine provides: exports, logs, counters, displays or paper lists.
- 2
Exports land in a network folder; photos and lists come in by tablet or phone.
- 3
demi reads files, photos and handwriting and assigns every value to machine, shift and order.
- 4
demi marks implausible or missing values and asks the shift.
- 5
The old machines appear in the same report as the new ones, every value with its source.
What changes
The whole machine park in one report
Decisions that see the old machines too
No more typing up slips and exports
What does it bring you?
Check it with your own numbers
Every starting value is an assumption you can change. The calculation sits right below, step by step.
Your numbers
Result
+150 hfreed per year
Assumptions and calculation
demi reads exports, photos and slips from the old machines, so nobody has to type them up.
5 min → 2.5 min per case
How we calculate
300 shift records × 5 min × 50% × 1.0 (manual) × 12 months = 9,000 min = 150 h
Value per year, before demi costs
Freed per year+150 h
Assumption: labor cost of $48.62 per hour in US manufacturing in June 2026 (BLS), plus workplace, IT and overhead.
= Value per year, before demi costs
+$9,750
gained per year
150 h ÷ 1,760 h per role = 0.1 full-time roles
An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.
Combine with more cases and get the packageQuestions about this use case
Do we have to retrofit the old machines?
No. demi uses what the machine already provides today: exports, logs, counters, displays and paper slips. If you want finer data later, simple retrofit sensors, for example on the signal tower, can be connected; their values flow into the same report.
How reliably does demi read photos of counters and displays?
Every value keeps its photo as evidence. demi checks plausibility: a counter never runs backwards, for example, and more parts than the cycle time allows are impossible. Anything uncertain is marked and checked with the shift.
What about exports on USB sticks or memory cards?
Whoever pulls them drops them into a fixed network folder. demi picks them up there, recognizes the machine from the file's structure and reads old formats too. An export that does not match its machine goes to review instead of into the report.
Does this replace an MES?
No. The new machines stay in the MES; demi adds the old ones to the same report. After approval demi also writes the values into the MES, so analyses there are complete.
