Skip to content

Industry · Article

2027: the year machines have to explain themselves

Between 2025 and 2028, several EU rules for industrial products take effect. At their core they ask the same thing: know what is in your product, report fast, keep records for ten years. Documentation becomes part of the product.

By demi editorial team6 min read

All posts

Friday, 5 pm. A manufacturer learns that a vulnerability in a control component it has built in for years is being actively exploited. The first question is not technical. It is: which delivered machines contain this part, in which software version, at which customers?

Since 11 September 2026, this question is no longer an exercise. Under the Cyber Resilience Act, manufacturers must report actively exploited vulnerabilities and severe security incidents: an early warning within 24 hours of becoming aware, and a full notification within 72 hours (European Commission). If answering means first piecing together bills of materials from three systems and calling the colleague who looked after the 2019 variant, you have a problem no lawyer can solve.

One calendar, one direction

The Cyber Resilience Act is not alone. Put the dates of the next few years side by side and a pattern appears:

  • 12 September 2025: the Data Act applies. Users of connected devices, industrial machinery explicitly included, get more control over the data they generate (European Commission).
  • 11 September 2026: Cyber Resilience Act reporting obligations for actively exploited vulnerabilities (European Commission).
  • January 2027: the new Machinery Regulation (EU) 2023/1230 applies and replaces the Machinery Directive (Official Journal of the EU).
  • 2 December 2027: the AI Act's obligations for high-risk systems under Annex III take effect, after the postponement by Regulation (EU) 2026/1744 (Official Journal of the EU).
  • 11 December 2027: the main obligations of the Cyber Resilience Act apply (European Commission).
  • 31 December 2027: end of mainstream maintenance for SAP Business Suite 7 (SAP).
  • 2 August 2028: the AI Act's high-risk obligations take effect for AI in products under Annex I. Machinery takes its own route: Regulation (EU) 2026/1744 moves the Machinery Regulation to Annex I Section B. The AI requirements for AI safety components in machinery then come through delegated acts to Annex III of the Machinery Regulation, which are to apply by 2 August 2028 (Official Journal of the EU).

These are different laws with different goals: data access, cybersecurity, machine safety, AI oversight. SAP maintenance is not a law, but it falls into the same window and ties up the same people. And in different words, the rules make essentially the same demand: know what is in your product. Can you say it quickly? And can you still prove it years later?

What the Machinery Regulation actually asks

The Machinery Regulation shows well how the role of documentation shifts. Instructions for use may now be digital. In that case the manufacturer must mark on the machine how to access them and keep them available online for the expected lifetime of the machine and at least ten years after it was placed on the market. If the buyer asks at the time of purchase, the manufacturer must supply them on paper free of charge. The technical documentation and the declaration of conformity must be kept available for market surveillance for at least ten years (Official Journal of the EU).

Ten years is not long in industry. A machine delivered in 2027 may still run in 2037, with three software updates, two retrofits and a different operator. The documentation has to travel with it. A PDF in a folder on a drive that disappears in the next server move is not enough.

Compliance becomes a search problem

This is the real shift. Until now, technical documentation was a cost block at the end of a project: necessary, unloved, rarely touched again after acceptance. Under the new rules, it becomes something that must answer questions at any time, often under time pressure.

Which machines contain component X? Which software version runs on the machine with serial number Y? Why was this safety guard changed in 2023, and who approved it? The answers are almost always somewhere: in the bill of materials, the ERP, the change notice, the test report, an email. The problem is rarely that the knowledge is missing. The problem is bringing it together in hours instead of weeks.

On top of that, these questions don't come once but again and again, from customers, auditors, insurers and your own management. If you piece every answer together by hand, you pay the effort anew with every request. If you build the links cleanly once, you pay once, and every further answer gets cheaper.

That turns compliance into a search problem across drawings, bills of materials, test reports and change notes. Companies that can find their own knowledge in minutes will carry the new load with far less effort than those that have to start a small project for every request.

The machine's data belongs to it too

The Data Act adds a second side. It gives business users, for example in manufacturing, access to data about the performance of their industrial equipment (European Commission). For the manufacturer, that means knowing not only what is in the machine, but also which data it generates, where that data lives and in what form it can be handed over. In the end, that too is a question of documentation.

Where you can start

A good first step costs almost nothing. Take three questions a customer, an authority or your own quality team asked in recent months, and measure how long the answer took and how many people it needed. Which components are in machine Y? Which version of the instructions applies to the 2022 machine? Who approved the change to the safety guard? These three numbers say more about your readiness for 2027 than any checklist.

Our assessment

Three predictions, explicitly as assessment and not as fact:

First, by 2027 at the latest, customers of machine builders will write into supply contracts how fast a supplier must answer a Cyber Resilience Act question, such as which components and versions are in a delivered machine.

Second, digital instructions with a machine-readable link on the nameplate will become the norm for new machines from 2027.

Third, the bigger AI workload for machine builders comes in 2028, not 2027, and it comes through the Machinery Regulation, not directly from the AI Act: as additional safety requirements in its Annex III that belong in the same technical documentation. Those who use 2027 to make their own documentation searchable will need far less effort in 2028.

The rules don't ask for new paper. They ask that the paper you already have can answer. At demi, every value keeps its source for exactly that.

Sources

  1. European Commission, Sept 2026: Cyber Resilience Act - Reporting obligations
  2. European Commission, 11/09/2026: Cyber Resilience Act
  3. European Commission, 05/11/2026: Data Act
  4. Official Journal of the European Union (EUR-Lex), 29/06/2023: Regulation (EU) 2023/1230 of the European Parliament and of the Council of 14 June 2023 on machinery
  5. Official Journal of the European Union (EUR-Lex), 08/07/2026: Regulation (EU) 2026/1744 of 8 July 2026 amending Regulations (EU) 2024/1689, (EU) 2018/1139 and (EU) 2023/1230 (Digital Omnibus on AI)
  6. SAP News Center, 07/10/2026: Planning Beyond 2030: What SAP Business Suite 7 and SAP NetWeaver Customers Using Third-Party Databases or Java Need to Know

Your configurator

No use cases yet

Your configurator is still empty

Add a use case from any card or case page and see what it brings per year, with the calculation. Free, no sign-up, no commitment: try it out and change any number.

Browse use cases