Today
Customers change drawings and do not note every change. A new revision arrives by e-mail or from the portal, the change table lists one hole, but a tolerance somewhere else has been tightened too. Anyone comparing two sheets by eye misses this, and the silent change only shows when the customer rejects parts.
An example
At Arnstein, revision D of the drawing for housing AG-2140 arrives from the customer portal. The change table lists only one hole growing from Ø 8 to Ø 8.5 mm. demi overlays D on C and finds two unnoted changes: the flatness of the sealing face has been tightened from 0.1 to 0.05 mm, and two edges now carry the note “burr-free”. demi also shows the open call-offs, the die-casting die, the machining fixture and four characteristics in the inspection plan. The project manager clarifies the flatness with the customer before revision D goes into production.
Your data, wherever it lives
Today customer drawings are everywhere: as PDFs in the mailbox, as downloads from several customer portals and as models in the PLM, with the orders in the ERP and the inspection plans in the QM system. demi reads and understands every revision, links it to part, order, tool and inspection characteristic and keeps your access rights. The AI then compares two revisions dimension by dimension in minutes, instead of someone laying printouts side by side, and project management decides.
Where the data lives today
- PDFs
- CAD & drawings
- PLM
- E-mails
- Web & portals
- ERP
- QM system
How demi solves it
Three layers in this order: connect the data first, then the rights, then the AI.
- 1 · ConnectData Layer
Data sources in this case: the mailbox, customer portals, PLM, CAD, ERP and inspection plans in the QM system. demi replaces nothing and links every revision of a customer drawing to the part, the open orders and call-offs, the tools and fixtures and the inspection plan. So with every new revision demi knows what depends on it.
- 2 · PermitPermission Layer
Project management, engineering and quality see the comparisons for their customers. A new revision only becomes valid when project management releases it; queries to the customer go out only after release, and everything is recorded.
- 3 · ActIntelligence Layer
The agent overlays the new revision on the old one and compares dimension by dimension, tolerance by tolerance and note by note, including what is not in the change table. It marks every change on the sheet and maps it to the affected orders, tools and inspection characteristics. What it cannot read with certainty, for example on a blurred scan, it reports as open.
How it runs
- 1
The new revision arrives by e-mail or from the customer portal.
- 2
demi assigns it to the part and pulls in the last valid revision.
- 3
The agent overlays both and marks every change, noted or not.
- 4
It shows which orders, tools, fixtures and inspection characteristics the change affects.
- 5
Project management assesses, clarifies open points with the customer and releases the revision.
What changes
Silent changes become visible
Affected orders and tools at a glance
Fewer rejected parts and deviation permits
What does it bring you?
Check it with your own numbers
Every starting value is an assumption you can change. The calculation sits right below, step by step.
Your numbers
Result
+192 hfreed per year
Assumptions and calculation
demi compares new and old revision dimension by dimension and shows what is affected; you release.
60 min → 36 min per case
How we calculate
40 drawing revisions × 60 min × 40% × 1.0 (manual) × 12 months = 11,520 min = 192 h
Value per year, before demi costs
Freed per year+192 h
Assumption: labour cost of €49.50 per hour in German manufacturing in 2025 (Destatis), plus workplace, IT and overheads.
= Value per year, before demi costs
+€12,480
gained per year
192 h ÷ 1,760 h per role = 0.1 full-time roles
An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.
Combine with more cases and get the packageQuestions about this use case
Does this work with scanned drawings too?
Yes. demi reads customer drawings as PDFs, scans or neutral CAD formats. On a poor scan the agent marks the spots it cannot read with certainty instead of guessing a change. If a 3D model comes with it, it compares the geometry too.
What about changes that are not in the change table?
Those are exactly what the agent looks for. It compares every dimension, tolerance, symbol and note, not only the noted points. What has changed without a note is highlighted separately, so you can ask the customer precisely.
How does demi know what a change affects?
From the links in the data: the part is tied to open orders and call-offs in the ERP, to tools and fixtures and to the characteristics in the inspection plan. When a characteristic changes, the agent shows every object that uses it.
Who decides whether the new revision is valid?
Your project management. The agent compares and shows the consequences; the revision becomes valid only after release. Until then it is marked as open in demi, and everyone sees that the old revision still applies.
