Skip to content
Quality, standards & complianceElectronics & SensorsMachinery & Plant EngineeringMetal & MachiningPlastics & Packaging+3

Speak inspection values instead of writing them

The operator calls out the readings, demi enters them in the inspection plan, checks them against tolerance and flags outliers and trends.

Today

In operator self-inspection, the operator measures with a micrometer and gauges and writes the values on a sheet, often only at the end of the lot, from memory or barely legibly. A value out of tolerance or a dimension slowly drifting away only shows up at final inspection. By then the whole lot is affected.

An example

At Rabenhammer Präzisionsteile, an operator turns shafts W Ø 40 h6 in 42CrMo4 and checks every tenth part. He calls the values into his headset: “Part 120, bearing seat 39.994, length 212.05.” demi enters them in the job's inspection plan and checks them against the tolerance of 39.984 to 40.000 mm. After four checks demi reports: the bearing seat grows by about 2 µm per check and will reach the upper limit in about 30 parts. The operator compensates for tool wear, the shift lead sees the alert and the correction in the log, and no part goes to scrap.
Fictional company, typical workflow.

Your data, wherever it lives

Inspection values arise at the machine today and end up on paper sheets, in spreadsheets at the terminal or hours later in the CAQ; inspection plans sit in the QM system, jobs and machine assignments in the MES. demi listens, understands every value and links it with job, characteristic and tolerance, with your rights. The AI checks each value the second it is spoken, and operator and shift lead decide what to do.

Where the data lives today

  • Phone & voice
  • Scans & paper
  • Office files
  • QM system
  • MES
Data LayerOne view of everything, with your rights

How demi solves it

Three layers in this order: connect the data first, then the rights, then the AI.

  1. 1 · ConnectData Layer

    Data sources in this case: inspection plans in the QM or CAQ system, jobs and machine assignments in the MES, past inspection sheets on paper and in spreadsheets, and the values spoken at the workstation. demi replaces nothing and links every spoken value with job, machine, characteristic, nominal value and tolerance. Confirmed values go into the CAQ with inspector and time.

  2. 2 · PermitPermission Layer

    The operator sees the inspection plan of their job, the shift lead all inspections of their line, quality everything. demi writes only confirmed values into the CAQ; holds and concessions are decided by an authorised person, and everything is recorded.

  3. 3 · ActIntelligence Layer

    The agent understands characteristic, number and unit via headset or tablet, even with shop-floor noise in the background, and repeats every value before it counts. demi computes the tolerance check and trends, such as a value steadily heading for a limit, from the readings, not by estimate. On an outlier or a trend the agent alerts the operator and the shift lead at once.

How it runs

  1. 1

    The operator logs on at the machine; demi knows the job and inspection plan from the MES.

  2. 2

    They call out the readings, characteristic by characteristic or in one sentence.

  3. 3

    demi repeats each value, enters it and checks it against the tolerance at once.

  4. 4

    If a value is out of tolerance or heading for a limit, the alert goes to operator and shift lead.

  5. 5

    Quality sees every inspection immediately and decides on a hold or a concession.

What changes

  • Inspection values complete, legible and on time

  • Deviations show up at the machine, not at final inspection

  • Both hands stay on the part and the gauge

What does it bring you?

Check it with your own numbers

Every starting value is an assumption you can change. The calculation sits right below, step by step.

Assumption, editable

Your numbers

Result

+320 hfreed per year

Assumptions and calculation

demi records the spoken values and checks them at once; you decide on every deviation.

10 min → 6 min per case

How does it run today?

What is already digital saves less: the factor lowers the share demi brings.

How we calculate

400 inspection sheets × 10 min × 40% × 1.0 (manual) × 12 months = 19,200 min = 320 h

Value per year, before demi costs

Freed per year+320 h

Assumption: labour cost of €49.50 per hour in German manufacturing in 2025 (Destatis), plus workplace, IT and overheads.

= Value per year, before demi costs

+€20,800

gained per year

320 h ÷ 1,760 h per role = 0.2 full-time roles

An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.

Combine with more cases and get the package

Questions about this use case

Does voice input work in a noisy production hall?

Yes, via a headset with noise cancelling or the tablet at the machine. demi repeats every value it recognised before it counts. What it did not understand with confidence, it asks again instead of guessing.

How does demi know the inspection plan?

From your QM or CAQ system: characteristics, nominal values, tolerances and inspection frequency per part. Which job runs on which machine comes from the MES. demi always works with the released version of the inspection plan.

What happens to the voice recordings?

demi stores the value, characteristic, inspector and time. Whether and how long the recording itself is kept is up to you, for example together with your works council. Monitoring individual operators' performance is not part of this case.

Do we need a new CAQ system for this?

No. demi is the path from the gauge into the CAQ: confirmed values go where you keep them today. Inspection plans, releases and analyses stay in the CAQ.

See this case with your data

In the demo we show you the workflow on your own systems.

Your configurator

No use cases yet

Your configurator is still empty

Add a use case from any card or case page and see what it brings per year, with the calculation. Free, no sign-up, no commitment: try it out and change any number.

Browse use cases