Skip to content
Service & spare partsConstruction & Building Services

Route warranty defects to the right trade

When a client reports a defect, you have trade, subcontractor, acceptance date and deadline in minutes and track the repair to the end.

Today

Years after handover the client reports a defect: the ventilation whistles in three classrooms, condensate drips from a duct. Who installed it, which subcontractor was involved, when was acceptance, is their warranty still running? The answers sit in contracts, acceptance records, plans and e-mails, spread across project folders nobody has touched since handover. By the time someone finds out, the deadline for claims against the subcontractor has sometimes passed, and the costs stay with you.

An example

A city reports to Nortavo Gebäudetechnik, almost four years after acceptance, that the ventilation in three classrooms of a primary school whistles and delivers too little air. demi assigns the report to the ILZ 40 air handling unit with 4,000 m³/h and the volume flow controllers on the second floor. According to the subcontract, a controls partner connected and balanced the controllers; its balancing report shows the set points per room. Its warranty ends in nine weeks, while Nortavo's warranty to the city runs for another 16 months. Project management sends the defect notice the same day, the subcontractor rebalances two weeks later, and the city sees the new report in the portal.
Fictional company, typical workflow.

Your data, wherever it lives

What you need for a warranty defect sits today in old project folders on the file server: contracts and subcontracts as PDFs, plans as CAD files or scans, acceptance and balancing reports on paper, bonds in the ERP and correspondence in the former site manager's mailbox. demi reads, understands and links it all per project, with your permissions. The AI finds trade, subcontractor and deadline in minutes instead of days, and your project management decides who fixes the defect.

Where the data lives today

  • Folders & drives
  • PDFs
  • Scans & paper
  • CAD & drawings
  • ERP
  • DMS & archive
  • E-mails
  • Photos, video & audio
Data LayerOne view of everything, with your rights

How demi solves it

Three layers in this order: connect the data first, then the rights, then the AI.

  1. 1 · ConnectData Layer

    The case needs data from project folders, the ERP, document management and mailboxes. demi replaces nothing and links, per project, main and subcontracts, bills of quantities, as-built plans, acceptance records, commissioning and balancing reports, warranty bonds and correspondence. So for every part of the installation it is clear which trade and which subcontractor installed it.

  2. 2 · PermitPermission Layer

    Contracts, prices and bonds are visible to project management, site management and legal; technicians see plans, records and the defect. The client sees only the status of their report in the portal. Defect notices to subcontractors and replies to the client go out only after project management approves them.

  3. 3 · ActIntelligence Layer

    The agent reads the report, assigns it to building, room and part of the installation and finds the trade and subcontractor in plans and bills of quantities. From acceptance dates and contract clauses it calculates the warranty you owe the client and the one the subcontractor owes you, and shows whether a gap between the two looms. It drafts the defect notice with evidence and tracks dates and replies; a person makes the legal assessment.

How it runs

  1. 1

    The client reports a defect by e-mail, phone or portal, ideally with a photo; demi opens the case and assigns it to building, room and part of the installation.

  2. 2

    The agent finds in plans, bills of quantities and subcontracts which trade and which subcontractor installed the part.

  3. 3

    It calculates the warranty you owe the client and the one the subcontractor owes you, and shows bonds that are still running.

  4. 4

    It drafts the defect notice to the subcontractor with records, plans and photos, and project management approves it.

  5. 5

    demi tracks date, repair and proof and keeps the client up to date.

What changes

  • Trade, subcontractor and deadline for every defect in minutes

  • Costs land with whoever caused them, not with you

  • The client always sees how far their report has got

What does it bring you?

Check it with your own numbers

Every starting value is an assumption you can change. The calculation sits right below, step by step.

Assumption, editable

Your numbers

Result

+108 hfreed per year

Assumptions and calculation

demi finds trade, subcontractor and deadline and drafts the notice; project management approves it.

90 min → 54 min per case

How does it run today?

What is already digital saves less: the factor lowers the share demi brings.

How we calculate

15 warranty defects × 90 min × 40% × 1.0 (manual) × 12 months = 6,480 min = 108 h

Value per year, before demi costs

Freed per year+108 h

Assumption: labour cost of €49.50 per hour in German manufacturing in 2025 (Destatis), plus workplace, IT and overheads.

= Value per year, before demi costs

+€7,020

gained per year

108 h ÷ 1,760 h per role = 0.1 full-time roles

An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.

Combine with more cases and get the package

Questions about this use case

How does demi know who installed which part?

From subcontracts, bills of quantities, as-built plans, measurement records and acceptance records. The agent maps the reported part to the scope of work and shows where it is written. If several trades are involved, such as ductwork and controls, it shows both with their share.

How does demi calculate the warranty periods?

From the acceptance date and the period stated in each contract, separately for client and subcontractor. If a subcontractor's work was accepted earlier or has a shorter period, the agent shows the gap and warns in time. Your project management or legal department makes the legal assessment of each case.

What about warranty bonds and retentions?

demi links every warranty bond and retention to subcontractor, project and deadline. If a subcontractor does not fix a defect, you see at once which security is still running. Whether and how to draw on it is your decision.

Our project folders were barely maintained after handover. Does it still work?

Yes. demi reads the folders as they are, including scanned records and old e-mails, and shows what is missing for a project, such as a subcontractor's acceptance record. Every defect handled makes the file more complete.

See this case with your data

In the demo we show you the workflow on your own systems.

Your configurator

No use cases yet

Your configurator is still empty

Add a use case from any card or case page and see what it brings per year, with the calculation. Free, no sign-up, no commitment: try it out and change any number.

Browse use cases