Skip to content
Quality, standards & complianceAerospace

Foreign objects in assembly: analyse FOD finds

demi records every FOD find with photo, location and shift, links it to operation and tool and shows where foreign objects come from.

Today

A drill chip, a rivet stem or a piece of lockwire left inside an assembly can later chafe through a line or jam a mechanism in the aircraft. FOD walks and tool checks happen every day, but the finds end up on slips of paper at the station, as photos on company phones and in chat groups. Nobody analyses whether the chips always appear after the same operation or in one particular shift. Yet EN 9100 requires foreign objects to be prevented, detected and removed, and customers ask for trends.

An example

At Rennhardt Aerospace, assembly reports 214 FOD finds in six weeks. The agent shows that 61 of them are titanium chips at station 4, nearly all from the late shift after reaming the holes on fitting AB-7731; in that shift the extraction hose is missing because the early shift takes it to station 2. A screwdriver bit was also missing from the shadow board twice while a panel was being closed at station 6. The head of quality orders a second extraction unit and has both panels opened and inspected.
Fictional company, typical workflow.

Your data, wherever it lives

Today your FOD finds sit on slips at the station, as photos on company phones and in chat groups, and in quality's spreadsheets, while operations are in the MES, tool issues in lists and actions in the QM system. demi reads, understands and links them per station, operation and shift, with your access rights. The AI then spots patterns in minutes that nobody analyses by hand, and your head of quality decides which action applies.

Where the data lives today

  • Photos, video & audio
  • Phone & voice
  • Chats
  • MES
  • QM system
  • Office files
Data LayerOne view of everything, with your rights

How demi solves it

Three layers in this order: connect the data first, then the rights, then the AI.

  1. 1 · ConnectData Layer

    Data sources in this case: photos and voice notes from phones, chats, the MES, the QM system and the tool issue lists. demi replaces nothing and links every find to station, zone, assembly and shift, to the operations that ran there, and to tools issued and missing. So all finds in an area sit side by side instead of disappearing into slips and chat histories.

  2. 2 · PermitPermission Layer

    The analysis shows stations, operations, zones and shifts, not names; whoever reports a find is never rated for it. The head of quality releases actions, and every release is recorded. Export-controlled drawings and programs stay visible only to those cleared for them.

  3. 3 · ActIntelligence Layer

    The agent recognises in the photo what was found, such as a chip, rivet, lockwire or cable-tie offcut, and estimates its size. It sets the finds beside the operations from the MES and the tool issue records and shows clusters by place, operation and time. When a tool is missing, it immediately lists the assemblies closed at that station since then. Counting and comparing follow fixed rules; the language model only describes what stands out.

How it runs

  1. 1

    Whoever finds a foreign object photographs it with a phone and says where it was.

  2. 2

    The agent identifies type and size of the find and assigns it to station, zone, assembly and shift.

  3. 3

    It links the find to the operations from the MES and to the tool issue records.

  4. 4

    Every week it shows clusters by place, operation and time; a missing tool it reports at once.

  5. 5

    The head of quality assesses the patterns and releases actions, such as extraction after drilling.

What changes

  • You see where and when foreign objects arise

  • Missing tools noticed before an assembly is closed

  • Actions that work, documented for audits and customers

What does it bring you?

Check it with your own numbers

Every starting value is an assumption you can change. The calculation sits right below, step by step.

Assumption, editable

Your numbers

Result

+64 hfreed per year

Assumptions and calculation

demi records each find with photo and place and links it to operation and tool; you decide.

20 min → 12 min per case

How does it run today?

What is already digital saves less: the factor lowers the share demi brings.

How we calculate

40 FOD reports × 20 min × 40% × 1.0 (manual) × 12 months = 3,840 min = 64 h

Value per year, before demi costs

Freed per year+64 h

Assumption: labour cost of €49.50 per hour in German manufacturing in 2025 (Destatis), plus workplace, IT and overheads.

= Value per year, before demi costs

+€4,160

gained per year

An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.

Combine with more cases and get the package

Questions about this use case

How does assembly report a FOD find?

With a phone or tablet at the station: take a photo and say briefly where the find was, which also works with gloves on. The agent identifies type and size and suggests station and zone; the reporter confirms with one tap. demi also reads in paper slips and photos from chat groups.

Does the FOD analysis monitor individual employees?

No. The analysis shows stations, operations, zones and shifts, not names, and whoever reports a find is never rated for it. You agree with the works council which analyses exist. That is the only way people keep reporting openly what they find.

What happens when a tool goes missing in assembly?

When a tool is missing from the shadow board or the tool crib, the agent alerts the shift lead and quality at once and lists all assemblies closed at that station since the last complete check. Whether an assembly is opened or X-rayed, quality decides.

How does this help in an EN 9100 audit?

EN 9100 requires foreign objects to be prevented, detected and removed. demi shows every find with its photo, the trends per area and what happened after each action, instead of a binder full of slips. What you show the auditor is your decision.

See this case with your data

In the demo we show you the workflow on your own systems.

Your configurator

No use cases yet

Your configurator is still empty

Add a use case from any card or case page and see what it brings per year, with the calculation. Free, no sign-up, no commitment: try it out and change any number.

Browse use cases