Today
Whether a van can go electric is decided today on brochure figures and gut feeling. What counts are real daily distances, winter cold, gradients, payload and the stops during which it can charge, and that data has long been sitting in telematics, logbooks and fuel cards. Without analysis the wrong vehicles are replaced first, the depot's grid connection falls short, or a technician is stuck at a customer with a flat battery.
An example
Nortavo Gebäudetechnik runs 64 vans for service and installation work. The agent analyses twelve months of telematics: 38 service vans drive less than 140 kilometres on 19 days out of 20 and spend the night at the depot in Ilmenau; they fit with a buffer even on cold winter days in the Thuringian Forest. Twelve more fit with a top-up charge over the lunch break, while 14 installation vans with trailers and trips as far as Schweinfurt do not fit yet. For the 22 vehicles whose leases end in 2027 it shows the five-year cost comparison and calculates that twelve charging points with load management are enough on the existing grid connection if charging starts at 17:00.
Your data, wherever it lives
What decides on electric sits in different systems today: trips, mileage and stop times in telematics, the fleet list and leases in spreadsheets and PDFs, fuel, workshop and energy costs in the ERP, the depot's load profile in the electricity meter. demi reads, understands and links it per vehicle, with your rights. The AI works through in hours what would otherwise take weeks of analysis, and management decides.
Where the data lives today
- Telematics
- ERP
- Office files
- PDFs
- Machines & sensors
How demi solves it
Three layers in this order: connect the data first, then the rights, then the AI.
- 1 · ConnectData Layer
Data sources in this case: telematics, the ERP, spreadsheets, PDFs and electricity meters. demi replaces nothing and links, per vehicle, trips, mileage, stop and charging times with the fleet list, leases, fuel, maintenance and energy costs and the depot's load profile. Data sheets of the electric models in question are added.
- 2 · PermitPermission Layer
Fleet management and the management team see the analysis for the whole fleet, department heads their own vehicles. Analysis is per vehicle, not per person, as agreed with the works council; private addresses appear nowhere. Management decides on purchasing, leasing and charging infrastructure, and every assumption in the calculation is logged.
- 3 · ActIntelligence Layer
The agent works out per vehicle the daily distances, the longest and coldest days, payload, trailer use and stop times at the depot and at customers. It checks them against the range of suitable electric models, with deductions for cold, gradients and payload, and compares the cost over the vehicle's life from your own invoices. For the depot it calculates from the load profile how many charging points with load management the existing connection can carry. The figures come from the data; the language model only explains them.
How it runs
- 1
demi reads twelve months of trips from telematics, plus the fleet list, leases, costs and the depot's load profile.
- 2
Per vehicle the agent works out daily distances, longest days, winter trips, payload and the times when it can charge.
- 3
It checks each vehicle against suitable electric models, with deductions for cold, gradient and payload, and shows the remaining buffer.
- 4
For the vehicles that fit, it compares the cost over their life and calculates the charging power the depot needs.
- 5
Management receives a replacement plan along the lease end dates and decides.
What changes
Electric where it really fits daily work
Charging points and grid connection planned on real demand
A replacement plan along the leases instead of gut feeling
What does it bring you?
Check it with your own numbers
Every starting value is an assumption you can change. The calculation sits right below, step by step.
Your numbers
Result
+115 hfreed per year
Assumptions and calculation
demi works out distances, stops and costs per vehicle from your data; management decides.
3 h → 1.8 h per case
How we calculate
8 vehicle assessments × 3 h × 40% × 1.0 (manual) × 12 months = 115 h
Value per year, before demi costs
Freed per year+115 h
Assumption: labour cost of €49.50 per hour in German manufacturing in 2025 (Destatis), plus workplace, IT and overheads.
= Value per year, before demi costs
+€7,475
gained per year
115 h ÷ 1,760 h per role = 0.1 full-time roles
An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.
Combine with more cases and get the packageQuestions about this use case
How does demi calculate winter range?
With deductions you set: for cold, gradients, payload and heating. Base values come from manufacturers' data sheets, deductions from experience or from vehicles you already drive electric. For each vehicle the agent shows the most critical days of the year and how much buffer remains.
Does this analyse the trips of individual employees?
No, the analysis is per vehicle, not per person. Where a van spends the night counts only as depot or home, without an address. You settle how telematics data is used with the works council, as before.
What about vans that stay at the technician's home overnight?
The agent shows them separately: whether charging at home, charging at the depot during working hours or a top-up at the customer is enough. It uses the stop times from telematics for this. How home charging is reimbursed is your decision.
Is our grid connection big enough for the charging points?
The agent works that out from your depot's load profile, the connection's capacity and the times the vehicles stand there. It shows how many charging points with load management work without an upgrade and from when a larger connection is needed. Planning with the grid operator and the electrical contractor stays with you.
