Skip to content
Product data & engineeringMachinery & Plant EngineeringConveying & IntralogisticsMining & Raw MaterialsWaste & Recycling+2

Remake an old part without a drawing

From photos, measurements and a 3D scan of the worn part, AI drafts the production drawing with material and tolerances from similar parts.

Today

Crushers, conveyors, presses and cranes run for thirty years and more; the maker is often gone, and sometimes there never was a drawing. When a part breaks, it is measured and drawn again by hand while the plant stands still. Often an almost identical part already exists in your own records, only nobody finds it.

An example

At Montanis Hartsteinwerke the swing jaw bearing bush of a 1991 jaw crusher is worn out; the maker no longer exists, and neither does a drawing. The maintenance technician scans the removed bush with a handheld scanner. In the scanned spare parts list the agent finds the material G-CuSn12, in the item master two similar bushes from another crusher, and from these drafts the drawing with fits for housing and shaft, the worn bore calculated back to nominal size. The plant engineer changes a chamfer and releases it, and the bush is turned the same day in the plant's own workshop.
Fictional company, typical workflow.

Your data, wherever it lives

Old spare parts lists and drawings sit as scans in the archive or on paper in the workshop cabinet, similar parts in the ERP item master and the CAD library, photos and measurements of earlier repairs in folders on the drive. demi reads these sources, recognises similar parts by shape, dimension and fitting situation and links them to the machine and the old part, with your rights. AI drafts the drawing while the plant is still down, and your engineering team checks and releases it.

Where the data lives today

  • Photos, video & audio
  • Scans & paper
  • CAD & drawings
  • PLM
  • ERP
  • Folders & drives
Data LayerOne view of everything, with your rights

How demi solves it

Three layers in this order: connect the data first, then the rights, then the AI.

  1. 1 · ConnectData Layer

    The case needs data from CAD, PLM, ERP and the file share. demi replaces nothing and links photos, measurements and the 3D scan of the old part to the machine, spare parts list, scanned old drawings and similar parts from the item master and CAD library. Material data, hardness values and earlier remakes hang on the same part.

  2. 2 · PermitPermission Layer

    Drawings and material data are visible to engineering and maintenance; maker documents stay with the group allowed to use them. A drawing goes to production or a subcontractor only after an authorised person has checked and released it, and the release is recorded.

  3. 3 · ActIntelligence Layer

    The agent searches for similar parts by shape, dimensions and fitting situation and proposes material and fits from those references. Dimensions come from scan and measurement; worn surfaces are calculated back to nominal size and marked. Every value in the draft drawing names its origin.

How it runs

  1. 1

    The maintenance technician photographs the part, measures the key dimensions or scans it with a handheld scanner.

  2. 2

    The agent finds similar parts in the item master, the CAD library and scanned spare parts lists.

  3. 3

    It proposes material, heat treatment and fits, each with the reference it comes from.

  4. 4

    Scan and measurements become the draft drawing, with worn surfaces calculated back to nominal size and marked.

  5. 5

    Engineering checks, changes and releases; the part gets an item number and is found at once next time.

What changes

  • Spare parts made faster, shorter standstills

  • Every remade part on record with drawing and number

  • Less dependence on makers that no longer exist

What does it bring you?

Check it with your own numbers

Every starting value is an assumption you can change. The calculation sits right below, step by step.

Assumption, editable

Your numbers

Result

+144 hfreed per year

Assumptions and calculation

demi finds similar parts on record and drafts the drawing from scan and measurements; you check and release.

8 h → 6 h per case

How does it run today?

What is already digital saves less: the factor lowers the share demi brings.

How we calculate

6 parts without a drawing × 8 h × 25% × 1.0 (manual) × 12 months = 144 h

Value per year, before demi costs

Freed per year+144 h

Assumption: labour cost of €49.50 per hour in German manufacturing in 2025 (Destatis), plus workplace, IT and overheads.

= Value per year, before demi costs

+€9,360

gained per year

144 h ÷ 1,760 h per role = 0.1 full-time roles

An estimate, not a promise. The starting values are assumptions for an industrial company with 150 to 500 people.

Combine with more cases and get the package

Questions about this use case

What does demi need from the old part?

For simple parts, photos from several sides and the key dimensions are enough; for freeform surfaces or gearing a 3D scan helps. The type plate, the fitting position and the mating part make the proposal better. If a dimension is missing that the agent cannot derive with certainty, it asks instead of guessing.

Where does the agent get material and tolerances from?

From your data: similar parts in the item master, old spare parts lists, hardness measurements or a material analysis of the old part. It derives fits from the mating part and the fitting situation, for example the bearing seat. Every proposal names its source, and engineering makes the decision.

What about safety-relevant parts?

For parts whose failure endangers people, such as on lifting gear or pressure equipment, a draft drawing is not enough. The agent flags such parts and requires the necessary evidence before release, for example a strength calculation or a test. Responsibility stays with your experts.

Do old drawings and spare parts lists need preparing first?

No. demi reads scans of drawings, spare parts lists and manuals as they are in the archive or on the drive, handwritten notes included where legible. Every new drawing goes into PLM and ERP with an item number, so the base grows with every part.

See this case with your data

In the demo we show you the workflow on your own systems.

Your configurator

No use cases yet

Your configurator is still empty

Add a use case from any card or case page and see what it brings per year, with the calculation. Free, no sign-up, no commitment: try it out and change any number.

Browse use cases